Philips HTS3541 user manual Language

Select [Setup], and then press OK.

Select [Audio] > [Night Mode] > [On], and then press OK.

Press

(Home).

Select [Setup], and then press OK.

Select [Advanced] > [Enhanced Audio] > [On], and then press OK.

Press

(Home).

Select [Audio] > [HDMI Audio], and then press OK.

Select [Setup], and then press OK.

Press

(Home).

Select [Audio] > [Default sound settings], and then press OK.

Select [Setup], and then press OK.

Press

(Home).

HDMI audio

To hear an HDMI audio output from your TV, connect your home theater to the TV through an HDMI cable.

1

2

3

4 Select the following options, and then press OK:

•[Bitstream]: Enable bitstream output over HDMI.

•[Auto]: Automatically select the best supported audio format.

•[Off]: Disable audio from the TV.

Audio post processing

To select a predefined sound mode, enable audio post processing at the speaker (see 'Sound mode' on page 15).

1

2

3

Note

•• To play the original audio of the disc, select [Off].

Night mode

For quiet listening, decrease the volume of loud sounds when you play discs. Night mode is only available for Dolby-encoded DVD and Blu-ray discs.

1

2

3

Restore sound mode settings

Restore the equalizer settings of all the sound modes to the default values.

1

2

3

Language

Select a language for the home menu, audio, and subtitles.

Home menu

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Preference] > [Menu language], and then press OK.

4 Select a menu language, and then press OK.

Disc audio

1 Press (Home).

2 Select [Setup], and then press OK.

3 Select [Preference] > [Audio], and then press OK.

4 Select an audio language for discs, and then press OK.

Note

•• If your preferred disc language is not available, select [Others] from the list, and enter the 4-digit language code found at the end of this user manual.

•• If you select a language that is not available on a disc, the home theater uses the default language of the disc.

EN 24