REMOTE CONTROL FUNCTIONS
PIP SWAP LOCATE
CH
VOL
Figure 7. Remote Control Functions
1.Turns on or off power to the monitor.
2.Selects the previous channel.
3.Selects the next channel.
4.Increases the audio volume.
5.Decreases the audio volume.
6.Moves the PIP location to the next location (upper left, upper right, lower right, lower left, middle).
7.Swaps the PIP image with the main image or the main image with the PIP image.
8.Selects the PIP function.
9.Moves the highlighter upward through a menu.
10.Decreases the value of a selected menu item.
11.Enters the OSD menu and submenus, and it selects items.
12.Moves the highlighter downward through a menu.
13.Increases the value of a selected menu item.
14 |