Pelco DX8100-ISCI installation manual Tools Needed, Getting Ready, Qty Description

Page 1

Tech Tips

INSTALLING THE DX8100-ISCI SCSI CARD WITH SATABOY

April 16, 2008

Helpful Tips for Pelco Products

TOOLS NEEDED

Qty

Description

 

 

1

Phillips screwdriver #1 (nonmagnetic)

1Properly grounded electrostatic discharge (ESD) wrist strap and mat

4

Small containers for storing screws (optional)

GETTING READY

Before you install the DX8100-ISCI SCSI card, familiarize yourself with the instructions in this Tech Tip. The steps to install the external video storage upgrade are summarized as follows:

1.Unpack the DX8100-ISCI kit and check that you have all the necessary kit components.

2.Verify that you have the required tools to install the SCSI card. For information about the tools required to install the SCSI card, refer to Tools Needed table above.

3.Shut down the DX8100 Series DVR. For information about shutting down the DX8100, refer to the DX8100 Installation Manual, Operation and Programming manual, or DX8100 Server online Help.

4.Unplug the power cord from the wall socket.

WARNING: It is critical that the unit be unplugged for your safety. You must remove the power cord because current continues to flow through the DX8100 even when the unit is off. Remove the power cord from the wall socket first, and then from the rear of the DVR.

World Headquarters

3500 Pelco Way, Clovis, California 93612 USA

USA & Canada Tel: 800/289-9100 Fax: 800/289-9150

International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com

Pelco and the Pelco logo are registered trademarks of Pelco, Inc. Information subject to change without notice.

©Copyright 2008, Pelco, Inc. All rights reserved.

Page 1 of 21

DX8100-ISCI_SCSI_CARD_SATABoy.fm

Image 1
Contents Getting Ready Tools NeededQty Description Removing Power Cord from DX8100 Opening the DX8100 Chassis Preparing the DX8100 for Scsi Card InstallationUnderstanding the DX8100 Component Layout Moving the Main Capture Card to Slot Moving Main Capture Card Installing the DX8100 Scsi CardReassembling the Unit For New SATABoy Only Setting UP the SataboyLeft click Internet Protocol TCP/IP Click Properties For New SATABoy with 8 or 14 HDs Configure ComputerConfigure SATABoy with 8 or 14 HDs Resume Computer Configuration Under Use the following IP address See Figure Resume SATABoy Configuration with 8 or 14 HDsTech Tips Click Delete Array Click Delete VolumeClick Create Raid Set button Select ADD VolumeTech Tips Click Disk Management Tech Tips Click Next, Next and Finish Tech Tips Apply the Labels

DX8100-ISCI specifications

The Pelco DX8100-ISCI is a highly regarded digital video recorder (DVR) designed specifically for surveillance and security applications. Utilizing cutting-edge technology, the DX8100-ISCI provides a robust solution for users seeking reliable video management and storage capabilities.

One of the main features of the DX8100-ISCI is its impressive storage capacity. The device supports up to 2TB of internal storage, allowing for extensive video retention and record time. This is particularly beneficial for organizations that require long-term surveillance without the need for constant data deletion. The DVR also incorporates advanced video compression technologies, enabling efficient use of storage space while maintaining high-quality video output.

A hallmark of the DX8100-ISCI is its intuitive user interface. The system enables seamless navigation and operation, providing users with a straightforward experience in monitoring and managing camera feeds. Features such as remote access via web browsers or dedicated software applications empower users to view live footage and recorded videos from anywhere with an internet connection.

Another significant characteristic of the DX8100-ISCI is its multi-camera support. The DVR can connect with up to 16 cameras, allowing for comprehensive surveillance of various locations simultaneously. This capability is particularly beneficial for businesses and institutions requiring extensive monitoring coverage.

In terms of video analytics, the DX8100-ISCI comes equipped with features such as motion detection and alarm management, enhancing the effectiveness of surveillance efforts. Users can set up automated alerts to notify them of any unusual activity, ensuring timely responses to potential security breaches.

The device also boasts robust connectivity options, including USB ports for easy data backup and transfer. Its compatibility with Pelco's diverse range of cameras ensures that users can tailor their surveillance systems to their specific needs.

Overall, the Pelco DX8100-ISCI stands out with its comprehensive feature set, user-friendly interface, and advanced technology, making it an ideal choice for businesses and organizations seeking to enhance their security measures. Its combination of reliability, capacity, and ease of use positions the DX8100-ISCI as a key player in modern surveillance solutions.