Philips HTS3355, HTS3545, HTS3345 user manual Setting the speakers’ channels, Press

Getting Started (continued)

Setting the speakers’ channels

You can adjust the delay times (center and surround only) and volume level for individual speakers. These adjustments let you optimize the sound according to your surroundings and setup.

Before you start...

Stop the disc playback by pressing STOP button twice or remove the disc from the disc tray. Otherwise, the settings are not accessible.

A In disc mode, press SETUP on the remote control.

B Press	repeatedly to select { Audio
Setup Page }.
C Press	to highlight { Speakers
Volume } and press .
Audio Setup Page
Speakers Volume
Speakers Delay
HDMI Audio
CD Upsampling Speakers Level Setup
Audio Sync		Front Left	0dB
		Front Right	0dB
		Center	0dB
		Subwoofer	0dB
		Rear Left	0dB
		Rear Right	0dB

D Use keys to set the volume level for

each speaker (-6dB ~ +6dB) and press OK to confirm.

E Use keys to highlight { Speakers Delay } and press .

Audio Setup Page

Speakers Volume

Speakers Delay

HDMI Audio

CD Upsampling

Audio Sync	Speakers Distance Setup
	Center	0ms
	Rear Left	0ms
	Rear Right	0ms

F Use keys to set the delay times (0 ms ~ 15 ms) for centre and rear speakers that best suit your surround sound needs.

G Press OK to confirm.

Helpful Hints:

–A 1ms increase/decrease of delay time is equivalent to 30 cm change in distance.

–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.

–The test tone will be automatically generated to help you judge the sound level of each speaker.

English

23

1_hts3355-3345-3545_55_eng2.indd23 23 2007-04-26 5:56:15 PM