Network Technologies MAN015 installation manual Legacy SUN Keyboard/Mouse to USB SUN Adapter

NTI USB-TO-SUN ADAPTER

	USB Type A
	Male Connector
Front View of USB-SUN
		To USB
		Type A port
	USB-AB-0.5M-5T		SUN CPU
			With USB
			Port

USB Type B

Male Connector

Figure 5- Connect USB-SUN to SUN CPU with USB port

Legacy SUN Keyboard/Mouse to USB SUN Adapter

When using the USB-SUN adapter to connect a SUN Keyboard and/or Mouse to a SUN CPU with a USB port:

1.Connect the 8 pin minDIN male connector of the SUN keyboard and mouse assembly into the female 8 pin miniDIN port on the USB-SUN adapter.

Rear View of USB-SUN

SUN Keyboard / Mouse

8 pin miniDIN Male Connector

Figure 6- Connect Legacy SUN Keyboard/Mouse to USB-SUN

2. Continue with steps 3 and 4 on page 2.

PLEASE NOTE: It is necessary to configure the SUN CPU such that the Sleep Mode is not enabled. If the SUN CPU goes into sleep mode either automatically or manually, the user must reboot the CPU in order to resume use of the CPU.

To disable the Sleep Mode, perform the following steps:

1.Select "Power Manager"

2.Look for "Device Idle Time Before Power Saving Starts"

3.Select "Always ON"

4.Look for "Override Device Idle Time For:"

5.Make sure neither "Monitors " nor "Disks" are selected.

3