Sun Microsystems none manual Specify name=hme and class=sbus

Page 36

4

4.Create the hme.conf file in the /kernel/drv directory using a text editor and add lines similar to the following to the file:

Specify name=”hme” and class=”sbus.

Use the reg property to specify the device, 0xe in this case. Use the value following Bus Type in the prtconf -voutput.

Type the addresses followed by the specified sizes. Precede each size with 0x and leading zeros, as indicated in the following screen.

Set ipg1 and ipg2. These parameters are set to 20 and 10, respectively, in this example. Type a semicolon ( ; ) after the last value. The ipg parameters are defined in Chapter 3.

name=”hme” class=”sbus” reg=0xe,0x8c00000,0x00000108,0xe,0x8c02000,0x00002000,0xe, 0x8c04000,0x00002000,0xe,0x8c06000,0x00002000,0xe,0x8c07000, 0x00000020

ipg1=20 ipg2=10;

5.Save the hme.conf file.

6.Save and close all files and exit all programs; exit the windowing system.

7.Reboot the system by typing the init 6 command at the # prompt.

28

Platform Notes: The hme Fast Ethernet Device DriverMay 1996

Image 36
Contents PlatformNotesThehmeFast Ethernet Device Driver Please Recycle Page Page Contents Setting Parameters Contents Vii Viii Introduction to the hme Fast Ethernet Device Driver Related DocumentationTypographic Conventions Describes the typographic conventions used in this bookShell Prompts in Command Examples Ordering Sun DocumentsSun Welcomes Your Comments Hme Device Driver Hardware OverviewOperating Speeds and Modes Auto-NegotiationInternal Transceiver External TransceiverPlatform Notes The hme Fast Ethernet Device Driver-May Parameter Definitions Driver Parameter Values and DefinitionsRead only Local transceiver auto negotiation Capability Defining the Current Status Inter-Packet Gap ParametersLancemode Operational Mode Parameters Defines the lancemode and ipg0 parametersSelecting the Internal or External Transceiver Defining the Number of Back-to-Back Packets To Transmit Reporting Transceiver CapabilitiesReporting the Link Partner Capabilities Describes the read-only link partner capabilities= No 100Mbit/sec half-duplex transmission Platform Notes The hme Fast Ethernet Device Driver-May Setting Parameters Parameter OptionsSetting Parameters Using ndd Identifying Device InstancesTo specify the device instance for the ndd utility Non-Interactive and Interactive Modes To modify a parameter valueTo modify a parameter value in interactive mode To display the value of a parameterTo list all the parameters supported by the hme driver Refer to -1 through 3-8 for parameter descriptionsSetting Forced Mode To set the mode to auto-negotiationSetting Parameters in the /etc/system File Configuring TCP/IP for Maximum PerformanceTo benchmark the TCP/IP throughput To set the TCP hiwater marks for best performanceTo set the ipg1 to 10 and ipg2 to 5 when you reboot Setting Parameters Using the hme.conf File Specify name=hme and class=sbus

none specifications

Sun Microsystems, established in 1982, became a pioneering force in the realms of computing and technology. Initially founded by four Stanford University graduates, the company was built on innovative ideas and a vision to create powerful computing solutions. One of the standout features of Sun Microsystems was its commitment to open systems and network computing. Sun's early adoption of Unix operating systems significantly influenced the development of reliable and scalable systems.

One of the key technologies developed by Sun was the SPARC architecture. This scalable, high-performance RISC (Reduced Instruction Set Computer) architecture powered many of its servers and workstations, allowing for enhanced computing capabilities. SPARC systems were well-regarded for their performance efficiency and reliability, making them a popular choice for enterprise applications.

Sun also played a crucial role in software development. The introduction of the Java programming language in the mid-1990s revolutionized how developers approached cross-platform application development. With its tagline “Write Once, Run Anywhere,” Java enabled applications to run on various platforms without modification. This technology became foundational in web-based applications and enterprise solutions.

Another notable aspect of Sun Microsystems was its commitment to networking and storage solutions. The company developed robust server systems that catered to high-performance computing demands, supporting enterprises in managing vast amounts of data. Sun’s Network File System (NFS) allowed seamless file sharing across networks, which became a standard in many organizations.

The company was also a pioneer in providing various services and solutions for data centers, including virtualization and cloud computing approaches that preceded the wave of cloud services we see today. Their emphasis on innovative storage solutions and data management systems positioned them as industry leaders.

Though Sun Microsystems was acquired by Oracle Corporation in 2010, its technological legacy continues to shape the IT landscape. The contributions made by Sun in areas such as software development, hardware architecture, and open systems have left an indelible mark on the technology industry. The emphasis on openness and innovation laid the groundwork for many principles that guide modern computing, making Sun Microsystems an integral part of the history of technology.