Sun Microsystems Ethernet PCI-X Adapter manual Verifying the Software Installation, # reboot -r

Page 30

CODE EXAMPLE 2-1Typical Install Script Output (Continued)

Installation completed.

10-Gigabit Ethernet Driver packages have been installed.

Optional VLAN Utility has been updated using 114600-04. It may be necessary to reboot the system to reload the updated driver.

A log of this Install can be found at: /var/tmp/10_Gigabit.install.2004.12.10.1029

5.Reboot the system to load the driver:

#reboot -r

6.Verify the installation to ensure that the driver installed and loaded properly.

Verifying the Software Installation

Unless you have the latest version of the driver software installed, the green LEDs on the adapter will not go on. Be sure that you have version 1.30 or later installed.

Use the modinfo command to verify that you have the current driver (v1.30 or later) installed.

If you type grep IXGE, using uppercase letters, you will get only the specific driver information:

#modinfo grep IXGE

267 1331c11 11e0e 271 1 ixge (IXGE 10Gb Ethernet Driver v1.30)

14 Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User’s Guide • December 2005

Image 30
Contents Sun Microsystems, Inc Please Recycle Contents Configuring VLANs SpecificationsDiagnostic Software Installing the Software ManuallyIndex Page Tables Accept-jumbo ParametersPage Figures Page USA-FCC Class a European UnionPage Preface How This Book Is OrganizedUsing Unix Commands Shell PromptsAccessing Sun Documentation Typographic ConventionsThird-Party Web Sites Contacting Sun Technical Support Sun Welcomes Your CommentsProduct Overview Product DescriptionHardware and Software Requirements 1Hardware and Software Requirements for Sun Sparc ServersFeatures 2Sun 10-Gigabit Ethernet PCI-X Adapter Fiber Optic ChannelsPage Installing the Adapter Installing the Adapter Without Dynamic ReconfigurationTo Install the Adapter Insert the adapter into the PCI openingTo Install the Optical Transceiver Page To Verify the Hardware Installation Ok show-devsCd /pci@9,600000/ethernet@1 View the .properties file for a list of device properties Rebooting the SystemOk boot -r Ok cd /pci@9,600000/ethernet@1 Ok .propertiesInstalling the Adapter With Dynamic Reconfiguration Using the Installation ScriptTo Install the Software Using the Installation Script Code Example 2-1Typical Install Script Output Execute the installation script# ./install # mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0Code Example 2-1Typical Install Script Output # reboot -r Verifying the Software InstallationReboot the system to load the driver # modinfo grep IxgeConfiguring the Network Host Files # ifconfig ixge0 plumb ip-addressup# grep ixge /etc/pathtoinst /pci@9,600000/ethernet@1 0 ixge Ifconfig ethnumber down ifconfig ethnumber up # cat /etc/hosts # Internet host table Localhost Zardoz Loghost Zardoz-11Page Configuring Driver Parameters Gigabit Ethernet Device Driver ParametersGigabit Ethernet Driver Parameter Values and Definitions Flow Control Parameters1ixge Driver Parameter, Status, and Descriptions Interrupt Parameters 2Read-Write Flow Control Keyword Descriptions3RX Blanking Register for Alias Read Jumbo Frames Set the instance to accept jumbo framesPlumb the interface up Setting ixge Driver Parameters To Configure Jumbo Frames in a Linux EnvironmentSetting Parameters Using the ndd Utility To Specify Device Instances for the ndd Utility Use the instance number to select the device# ndd -set /dev/ixge instance number # ndd /dev/ixge parameter To modify a parameter value, use the -setoption# ndd -set /dev/ixge parameter value # ndd /dev/ixgeSetting Parameters Using the ixge.conf File # ndd -get /dev/ixge \?Man prtconf To Set Driver Parameters Using a ixge.conf File # grep ixge /etc/driveraliases ixge pci8086,1048.108e.7036Set the parameters for the above devices Save the ixge.conf fileGigabitEthernet Driver Operating Statistics 5Read-Only ixge Device Capabilities6describes the kstat ixge1 receive and transmit parameters 6Receive and Transmit ParametersTxmsgdupfail Code Example 3-1Output from kstat Command # kstat ixge1Code Example 3-1Output from kstat Command Use the kstat command to discover device capabilities # kstat ixge1 grep capUse the kstat command to discover link settings # kstat ixge1 grep link# kstat ixge0 grep macmtu Page Configuring VLANs Overview of VLANs1shows an example network that uses VLANs Configuring VLANs To Configure Static VLANs 2Ethernet Tag Header Format# ifconfig ixge123000 plumb up # ifconfig ixge4000 plumb up # ifconfig -aPage Specifications Table A-1Performance SpecificationsPhysical Characteristics Table A-2Physical CharacteristicsDiagnostic Software SunVTS Diagnostic SoftwareTo Update SunVTS to Recognize the Adapter Updating SunVTS to Recognize the AdapterTable B-1SunVTS Documentation Using the SunVTS netlbtest To Use the netlbtestPage Installing the Software Manually To Install the Driver Software ManuallyTable C-1Files and Directories on the CD-ROM # showrev -p grepInstall the patch Check to see if vlan drivers are installed on the system# /usr/bin/pkginfo SUNWvld SUNWvldx Select the packages you want to install # pkgadd -d /Solaris9/i386/PackagesSetting Up the Driver in a Linux Platform To Set Up the Driver in a Linux PlatformBuild the 10-Gigabit Ethernet driver Build the man pages optional Change to the rpm directoryLoad ixge driver for all instances # lsmod Verify that the driver is loadedAdd the ixge interfaces to the /etc/modules.conf file # dmesgSetting Driver Parameters in a Linux Environment # ethtool eth3# rmmod ixge To Set ixge Parameters in a Linux EnvironmentLoad the Sun 10-Gigabit Ethernet PCI-X device driver # modprobe ixge option=VAL1, VAL2Valid Range 0-3 0=none, 1=Rx only, 2=Tx only, 3=Rx&Tx Ensure that the ixge module is loaded To Configure VLANs in a Linux EnvironmentConfigure ixge vlan eth2 in this example Insert the vlan moduleModify /etc/modules.conf file by adding these lines To Configure Bonding for Multiple ixge InterfacesConfigure bond0 interface Load the bonding driverIndex Vlan ID

Ethernet PCI-X Adapter specifications

The Sun Microsystems Ethernet PCI-X Adapter stands as a pivotal component for enhancing network performance in various computing environments. Designed to cater to the demanding needs of enterprise networks, this adapter provides a seamless integration of high-speed connectivity with robust hardware design, making it a preferred choice for businesses relying on Sun systems.

One of the standout features of the Sun Ethernet PCI-X Adapter is its adherence to the PCI-X interface, which allows for faster data transfer rates compared to traditional PCI. With speeds of up to 1 Gbps, this adapter supports larger data throughput, significantly improving the efficiency of data-intensive applications. The PCI-X standard, operating at an impressive 64-bit bus, not only enhances performance but also ensures backward compatibility with earlier PCI standards, offering flexibility in deployment.

In terms of network connectivity, the adapter supports both 10/100/1000 Mbps Ethernet speeds, allowing it to automatically negotiate the best speed based on network conditions. This feature is particularly advantageous for enterprises with diverse networking equipment, enabling seamless integration without compromising on performance.

The Sun Microsystems Ethernet PCI-X Adapter comes equipped with advanced technologies such as Jumbo Frames support. This allows for the transmission of larger packets over the network, which is beneficial for applications that require the movement of substantial amounts of data, like video streaming or large file transfers. By facilitating Jumbo Frames, the adapter minimizes CPU load and enhances overall throughput, leading to better resource utilization.

Another noteworthy characteristic of this adapter is its robust error checking and correction capabilities. This ensures data integrity during transmission, reducing the likelihood of packet loss and improving the reliability of network communications. Coupled with support for multiple protocols, including TCP/IP, the Ethernet PCI-X Adapter provides versatility, adapting to various network configurations and applications.

Furthermore, the adapter boasts a high-performance driver suite, which enhances its compatibility across different operating systems, ensuring smooth integration into existing network environments. The flexibility and scalability of this adapter make it an ideal solution for current and future network demands.

In conclusion, the Sun Microsystems Ethernet PCI-X Adapter delivers exceptional performance, reliability, and versatility, making it an essential asset for enterprises seeking to enhance their networking capabilities. Whether for upgrading existing infrastructure or supporting new applications, this adapter stands out as a dependable choice for high-speed connectivity in the constantly evolving technology landscape.