Mouse Click Equivalents

NTI UNIMUX SERIES USB DVI KVM SWITCH

Select Country Code

It is possible to configure the UNIMUX to emulate a specific international Sun keyboard regardless of what actual keyboard is connected. This is recommended when the CPU needs the layout code (i.e. a SUN CPU) and the keyboard doesn't have an explicit layout code (i.e. some Windows keyboards). To do this, manually set the UNIMUX to indicate the international keyboard identification number to the CPU using the following procedure;

1.Connect the keyboard to be used to the UNIMUX

2.Enter Command Mode

3.Type Lxx, where xx is the number from the list below that corresponds to the desired country code

4.Exit Command Mode

5.Reboot the CPU connected to the UNIMUX

Country Codes

00	Auto Detect	13	International (ISO)	26	Swedish
01	Arabic	14	Italian	27	Swiss/French
02	Belgian	15	Japan (Katakana)	28	Swiss/German
03	Canadian-	16	Korean	29	Switzerland
	Bilingual
04	Canadian-French	17	Latin American	30	Taiwan
05	Czech Republic	18	Netherlands/Dutch	31	Turkish
06	Danish	19	Norwegian	32	UK
07	Finnish	20	Persian (Farsi)	33	US
08	French	21	Poland	34	Yugoslavia
09	German	22	Portuguese
10	Greek	23	Russia
11	Hebrew	24	Slovakia
12	Hungary	25	Spanish

Figure 8- Country Codes for international SUN keyboards

For more on international SUN keyboards, see page 12.

Mice and Trackballs with MACs

The UNIMUX can be configured to enable full functionality between mice and trackballs having two or more buttons and USB MAC CPUs. By default, the ports on the UNIMUX are configured for use with WINDOWS and SUN CPUs and have no special translation for using multi-function mice and trackballs when a MAC CPU is connected. Using the commands <M> + <x> + <x> (xx = port number), or <W> + <x> + <x> in Command Mode (page 9), either enable or disable this feature as needed for each port.

Note: Be sure to re-configure port for connection to a WINDOWS or SUN CPU if a MAC CPU is removed and a WINDOWS or SUN CPU is then connected.

To emulate a right button click using Apple 1 button mouse, hold down the Command key (	) while pressing the mouse
button.

Note: Right mouse button emulation must be enabled (see Change Settings on page 19) for this to work.