NTI XTENDEX Extenders
INSTALLATION
Installing The Local Unit
1. Plug the cables of the Local Unit into the back of the CPU. (See Fig. 1.)
a)Connect the blue 15HD cable end to the VGA port on the back of the CPU.
b) Connect the purple 6 pin miniDIN cable end with the keyboard symbol on it to the keyboard port on the back of the CPU. (KVM models only)
(Keyboard)
c)Connect the green 6 pin miniDIN cable end with the mouse symbol
on it to the mouse port on the back of the CPU. (KVM models only)
(Mouse)
DEVICE
CONNECTORS
6 pin miniDIN
Female Connector
SERIAL
CONNECTOR
9D Male
RS232 Connector
VIDEO
CONNECTOR
15HD Female Video Connector
(LIGHT GRAY- RS232) |
|
| 9D Female Connector |
| 6 pin miniDIN |
(PURPLE- | Male Connector |
| R |
| NetworkNTITechnologies Inc |
XTENDEX | |
|
| (BLUE- VIDEO) |
|
|
PS/2 CPU | (Front View) |
15HD Male
Video Connector
Figure 1- Connect the Local Unit with VGA video and RS232 support to the CPU
d)If the Local Unit has RS232 support, connect the light gray 9D cable end to the RS232 port on the back of the CPU.
e)If the Local Unit has Audio support, connect the lime green 3.5mm stereo plug into the "line out",
"speaker", or "headphones" jack on the back of the CPU. (See Fig. 2). Connect the pink 3.5mm stereo plug to the “line in” or “microphone” jack on the back of the CPU.
Notes:
If all 3 jacks are available, use the jack marked "line out".
The "line out" jack is typically lime green and may be marked with this symbol
The "speaker" jack is typically orange, and may be marked with this symbol
The "headphones" jack may be marked with this symbol
The “microphone” jack is typically pink and may be marked with this symbol
6