Troubleshooting, Specifications | Network Technologies ST-nXm-U

TROUBLESHOOTING

•No video

•No video when connected to SUN w/pgX32 or pgX64 video card

•Check all cable connections on video source and switch.

•No DDC support in switch. See page 19 for SUN DDC CONFIGURATION

• Cannot connect to other	• Make sure user NTI keyboard adapter cable is connected, even if no
CPU ports	keyboard is attached (such as a VKTINT-1). (See FYI on page 8, after
	item 2.)

Video Connectors

Video Resolution

Video Support

Video Bandwidth

Keyboard/Mouse connectors

Mouse Compatibility

Keyboard Compatibility

CPU connectors

CPUs supported

RS232 Connector

Power required

Fuse Protection

Regulatory approval

15HD female

1900 x 1200 (max.)

SVGA, XGA, VGA multi-scan monitors

150 Mhz

Female 8 pin miniDIN female

•Compatible with all standard 2-button PS/2 mice as well as the following:

•Microsoft IntelliMouse®

•Logitech (and other) 3-button mice.

•Alps glidepoint touchpad (extended functions-i.e. tapping, etc.-are not supported).

•Cirque Glidepoint touchapd.

•IBM Scroll Point mouse (extended stick functions are not supported).

•Kensington Orbit trackball.

•Logitech 2-button wheel mouse.

•Microsoft Ballpoint mouse.

•SUN 3-button mice are supported. Wheel button on IntelliMouse emulates SUN's third mouse button.

•PS/2 (using a VKTINT-1)

•Legacy SUN

Female pin 8 miniDIN

•PS/2 platform computers, including laptops, HP 9000, Silicon Graphics and IBM RS6000.

•SUN, including ULTRAs, SUN Blade 100, SUN Blade 1000, SUN Fire™ 280R, SUN Fire V20z and SUN Ray™ (using NTI's USB-SUN adapter).

Male DB9

110 or 220 VAC @ 50-60 Hz at less than 25 watts.

2A, 240V

CE (except model ST-2x2-UDT)