METRObility Optical Systems R125-34, R135-34, R125-37 manual

Page 4

OverviewThe Radiance SONET single interface line card provides seamless

integration between fiber optic multimode and singlemode segments in OC-3/ STM-1 or OC-12/STM-4 networks. Use the card’s singlemode connector to extend your network reach up to 40 km.

The Radiance line card is manageable through console commands, Metrobility’s GUI-based NetBeacon® or WebBeacon software, or any SNMP application. This ability provides software control over the card’s configuration and notification of a failure to a management station.

The Radiance SONET single interface line card offers the following key features:

•Two Link Loss Return (LLR) switches and Link Loss Carry Forward (LLCF) to aid in troubleshooting remote network connections.

•Full-duplex support.

•OC-3/STM-1 (155Mbps) and OC-12/STM-4 (622Mbps) support.

•A link LED on each port to indicate that the port is receiving a signal.

•Reliable data transmission over multimode cables up to 2 km and singlemode cables up to 40 km.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Sonet Radiance Sonet Single Interface Line Cards Fiber to FiberPage Page 2Set the DIP Switches 1Unpack the Line CardLink Loss Return Switches Install the Line Card 4Connect to the Network LED Indicators Link Loss Return LLR SonetLink Loss Carry Forward Llcf Topology Solutions Technical Specifications SM LHProduct Safety, EMC and Compliance Statements CSAWarranty and Servicing Product Manuals
Top Page Image Contents