Moxa Technologies 1110 user manual Hardware Installation, Windows 98 and Windows

Page 12

UPort 1110 and 1130 User’s Manual

Installation and Configuration

6.Click Finish to complete the installation of the driver.

Hardware Installation

After installing the driver, plug the adaptor into any upstream USB port, such as a USB port on your computer. Windows will automatically detect the adaptor and begin installing the driver. When the Windows finishes installing the driver for the adaptor, it will then detect a new COM port, and will then install another driver for the new COM port..

ATTENTION

For best results, we recommend that you install the driver before plugging the adaptor into the USB port. Please refer to the previous section on Initial Driver Installation for instructions.

Windows 98 and Windows 2000

The following instructions are for Windows 98 and Windows 2000 systems:

1.After plugging the adaptor into a USB port, the Found New Hardware window should open automatically. The USB icon indicates that the USB port is being installed. No action is required.

2-5

Image 12
Contents UPort 1110 and 1130 User’s Manual Copyright Notice Table of Contents Introduction Package Checklist Product FeaturesOverview Product Specifications USBLED Indicators UPortInstallation and Configuration Initial Driver Installation Page Page Hardware Installation Windows 98 and WindowsWindows XP and Windows Page Page Page Page Page Configuring the COM Port Configuring the Adaptor Page Removing the Adaptor Uninstalling the Driver Page Pin Assignments UPort DB9 Pin AssignmentsTerminal Block Pin Assignments Service Information Moxa Internet Services Problem Report Form UPort 1110 UPortProduct Return Procedure