Introduction | METRObility Optical Systems 8100 instruction

be issued.

Managed CenturyStack RMON Management enables users to set up Event Groups. The Event Group Implementation of the Event Group is optional. The Event Group controls the generation and notification of events from the hub. Each entry in the event Table describes the parameters of the event that can be triggered. Each event entry is fired by an associated condition located in the MIB. An event entry may also be associated with a function elsewhere in the MIB that will be executed when the event is generated. For example, a channel may be turned on or off by the firing of an event. Each entry may optionally specify that a log entry be created on its behalf whenever an event occurs. Each entry may also specify that notification should occur by way of SNMP trap messages. In this case, the community for the trap message is given in the associated event Commu- nity object. The enterprise and specific trap fields of the trap are deter- mined by the condition that triggered the event. Two traps are defined: rising Alarm and falling Alarm. If the event Table is triggered by a condition specified elsewhere, the enterprise and specific trap fields must be specified for traps to be generated for that condition.

Users can create up to 32 Event Entries.

Introduction 11

8100 specifications

The METRObility Optical Systems 8100 is a leading-edge platform designed to meet the increasing demands for efficient, high-capacity communication networks. With an emphasis on performance, reliability, and scalability, the 8100 series has become a pivotal solution for service providers and enterprises across the globe.

One of the standout features of the METRObility 8100 is its modular architecture. This design allows operators to customize their systems according to specific needs, ensuring they can scale easily as their traffic demands increase. The system supports various interface configurations, including Ethernet, TDM, and fiber-optic links, which offer flexibility in deploying suitable solutions for diverse environments.

In terms of technology, the 8100 utilizes advanced optical transmission methods that enhance data throughput and reduce latency. The system is based on Dense Wavelength Division Multiplexing (DWDM), allowing multiple signals to be transmitted simultaneously over a single fiber strand. This significantly increases the network’s capacity while minimizing the physical infrastructure needed, leading to cost savings and easier management.

Another critical characteristic of the METRObility 8100 is its robust fault tolerance and redundancy capabilities. The system features built-in protection mechanisms that ensure uninterrupted service even in the event of equipment failures or network disruptions. This is crucial for mission-critical applications where downtime can lead to significant financial losses or disruptions to essential services.

For monitoring and management, the 8100 is equipped with sophisticated software tools that enable real-time visibility into network performance. Operators can easily track metrics, set up alerts, and manage network resources efficiently through a user-friendly interface. This proactive approach to network management minimizes response times to potential issues, further enhancing operational efficiency.

Energy efficiency is another characteristic of the METRObility 8100. With a focus on reducing the carbon footprint, the system employs various power-saving features that lower energy consumption without compromising performance. This is particularly important in today’s eco-conscious market, where sustainability is increasingly prioritized.

In conclusion, the METRObility Optical Systems 8100 embodies a blend of cutting-edge technology, flexible design, and operational excellence. With features tailored for high capacity and reliability, it represents an ideal solution for organizations seeking to optimize their communication infrastructure while preparing for future growth.