Paradyne 4929 DSLAM manual Unpacking the Hardware, Package Contents, Mounting Configurations

Page 17

2. Installation

Unpacking the Hardware

HANDLING PRECAUTIONS FOR

!STATIC-SENSITIVE DEVICES

This product is designed to protect sensitive components from damage due to electrostatic discharge (ESD) during normal operation. When performing installation procedures, however, take proper static control precautions to prevent damage to equipment. If you are not sure of the proper static control precautions, contact your nearest sales or service representative.

The DSLAM is shipped in a cardboard shipping container. Carefully remove the unit from its shipping container and check for physical damage. If the unit shows signs of shipping damage, notify your sales representative.

Package Contents

In addition to this installation guide, the shipping carton should contain:

„4900 Series DSLAM

„Two sets of mounting brackets: one set suitable for a 19-inch (483 mm) rack and one set suitable for a 23-inch (584 mm) rack (including Bay Networks and Nortel)

„Other hardware (including cable ties, rubber feet)

„Installation guide

If anything is missing, notify your sales representative.

Before installing the DSLAM, read the Important Safety Instructions in the beginning of this document.

Be sure to register your warranty at www.paradyne.com/warranty.

Mounting Configurations

Three basic installation configurations are available:

„Rack mount – see Installing the Brackets for Rack Mounting on page 2-4and Installing the DSLAM Into a Rack on page 2-5.In this guide, the term rack refers to any rack, cabinet, frame, or bay suitable for mounting telecommunications equipment.

„Wall mount – see Installing the DSLAM on a Wall on page 2-7.

„Shelf or desktop – see Installing the DSLAM on a Shelf or Desktop on page 2-9.

4929-A2-GN20-00

March 2005

2-3

Image 17
Contents Dslam Copyright 2005 Paradyne Corporation All rights reserved Software and Firmware License Agreement Important Safety Instructions Page United States EMI Notice Contents LEDs Configuration Using the NMSCommand Line Interface Snmp Interface Connectors and Pin AssignmentsEquipment List Technical Specifications Index Contents March Document Summary About This GuideDocument Purpose and Intended Audience Document Number Document Title Related Product DocumentsOverview FeaturesIntroduction Introduction Cables Required InstallationPreparation Pots ADSL2+SFP MIM-100FXUnpacking the Hardware Package ContentsMounting Configurations Procedure Installing the Brackets for Rack MountingInstalling the Dslam Into a Rack 05-17616 Installing the Dslam on a Wall 17.85 in 453 mm Installing the Dslam on a Shelf or Desktop Installation March Cabling Overview CablingInstalling the Micro Interface Module Connecting the ADSL2+ and Pots Connectors Connecting the SFP Connector or the 10/100/1000 Connector Connecting DSLAMs to Each Other Connecting a Terminal or PC to the COM Port Connecting the COM PortConnecting a Modem to the COM Port Connecting to Power+48 VDC -48 VDC LED Locations LEDsLED Meanings Front Panel LEDs 1PWR Front Panel LEDs 2ACT Web Interface System Requirements Configuration Using the NMSConfiguring Your Windows PC to Communicate with NMS NMS home page appears Parameter Description Management ConfigurationDslam Advanced ConfigurationHttp Password Snmp Configuration Global Set Snmp Community AdministrationGlobal Circuit Configuration Parameter Description Global Dscp Rules Vlan Global IP Rules Specify a Vlan ID range. For each Global IP Range Global MAC Rules Specify a Vlan ID range. For each Global MAC Rule Global Vlan Rules Specify a Vlan ID range that constitutes a match EC/FDM Global Advanced ConfigurationCircuit Summary Circuit Configuration Parameter Description Dscp Rules Parameter Description IP Rules Parameter Description MAC Rules Parameter Description Vlan Rules Allow Tag/Untag on Ingress Specify tag or untag Pkt Backbone Vlan ID Upstream device must be properly configured Port Statistics Copy Port SNR Advanced Configuration MAC-IGMP MAC and Igmp SummaryParameter Description Configuration Using the NMS Dslam Interconnect Configuration Configuration Using the NMS March CLI System Requirements Command Line InterfaceConnecting a PC Directly CLI Commands 1 Description CLI CommandsLaunching the Terminal Emulation Program Logging Into the CLISet and Show Command Items and Values 1 CLI Commands 2 DescriptionSet and Show Command Items and Values 2 Set and Show Command Items and Values 3 Using the CLI to Establish Inband ManagementCommand Line Interface March Downloading MIBs Snmp InterfaceSnmp Community String Access Community StringSnmp Community Strings Figure A-1 Dslam Front Panel Connectors and Pin AssignmentsDSL Ports and Pots Splitter Connectors Table A-2. Port 3 GigE Connector Signal Pin SFP ConnectorDB9 to RJ45 Adapter Pinouts 10/100/1000BaseT ConnectorTable A-3 /100/1000 Pinouts Signal Equipment List Equipment List March Table C-1 Series Dslam Technical Specifications 1 Criteria Technical SpecificationsDSL EMCTable C-1 Series Dslam Technical Specifications 2 Criteria CLI IndexIN-2 Snmp IN-4

4929 DSLAM specifications

The Paradyne 4929 Digital Subscriber Line Access Multiplexer (DSLAM) represents a significant advancement in broadband access technology, designed to facilitate high-speed internet connectivity over existing copper phone lines. Its deployment has empowered telecommunications providers to offer enhanced services, ensuring reliable and efficient data transmission.

One of the main features of the Paradyne 4929 DSLAM is its ability to support multiple DSL technologies. Primarily, it accommodates both Asymmetric Digital Subscriber Line (ADSL) and Very high-bit-rate Digital Subscriber Line (VDSL), allowing operators to offer various service tiers depending on customer needs. This flexibility caters to both residential consumers seeking basic internet access and businesses requiring higher bandwidth and improved performance.

The Paradyne 4929 is designed with a robust architecture that supports high-density line cards. This enables the multiplexing of numerous DSL connections, maximizing the number of subscribers that can be served from a single unit. Additionally, its compact design and modular construction allow for easy scalability, ensuring that providers can expand capacity as subscriber demand grows without major overhauls to existing infrastructure.

Another notable characteristic of the Paradyne 4929 DSLAM is its advanced capabilities for traffic management and Quality of Service (QoS) features. By implementing intelligent traffic prioritization, the DSLAM can optimize bandwidth allocation for different types of data, ensuring that critical applications such as VoIP and streaming services receive the necessary resources for smooth performance. This focus on QoS enhances user experience and customer satisfaction.

The DSLAM also integrates seamlessly with the existing network infrastructure, supporting various management and provisioning protocols, including SNMP (Simple Network Management Protocol). This facilitates real-time monitoring and maintenance, allowing operators to quickly address issues and optimize performance.

Moreover, the Paradyne 4929 DSLAM includes built-in security features, protecting against unauthorized access and potential cyber threats. This increased security aspect is crucial for service providers looking to safeguard their networks and customer data.

In summary, the Paradyne 4929 DSLAM stands out in the competitive landscape of broadband access technologies. With its support for multiple DSL standards, high-density capabilities, intelligent traffic management, and robust security measures, it remains a reliable choice for telecommunications providers aiming to deliver high-speed internet services effectively. The 4929 DSLAM's adaptability and performance make it a strong contender in the evolution of broadband technology, driving the digital transformation in both residential and business environments.