Paradyne 6700 SERIES manual Choosing Modem Settings, Modem Settings Dialog Box

Page 40

Custom Network Interface Settings

Choosing Modem Settings

Use Modem... to specify modem interaction commands and modes for SLIP interfaces.

.Procedure

1.Choose Settings... from the Network menu. The Custom window appears, as shown in Figure 5-1.

2.Choose Setup from the Custom window menu bar.

3.Choose Modem... from the Setup menu. The Modem Settings dialog box appears, as shown in Figure 5-6.

Table 5-4 describes the fields on the Modem Settings dialog box.

Figure 5-6. Modem Settings Dialog Box

4.Select the appropriate modem from those listed under Modem Defaults. The Network Configuration feature then uses default commands based on your choice.

If your modem is not listed, select Hayesr which works across almost all modem types. Select None to indicate a direct null-modem connection, which does not require any dial.

Issue 2 December 1996

5-9

Image 40

Contents Comsphere Series Network Management System Warranty, Sales, and Service Information Series Network Management SystemTrademarks All Rights Reserved PrefaceSnmp Settings Workstation Settings Configuration Files and InterfacesSnmp Settings Custom Network Interface SettingsCustom Nework Interface Settings TablesPreface Related DocumentsPreface Preparing for Network Configuration What is the Network Configuration Feature?Ovrviw Optional Accessing the Network Configuration Feature Network Configuration Main MenuNetwork Configuration Main Menu Options Main Menu OptionsWorkstation Settings Designating NMS Server Names IP Addresses ProcedureAdding Names and IP Addresses Modifying or Deleting Names and IP Addresses Choosing the Active Server Active Server Dialog BoxEntering Administrative Data Station Administration Dialog BoxConfiguration Files and Interfaces Saving a Configuration File Configuration FilesExiting a Configuration File Interfaces Adding an InterfaceDuplicating an Interface Interface Name Dialog BoxDeleting an Interface Delete Interface Dialog BoxAutomatically Connecting Interfaces Auto Connect Interfaces Dialog BoxPage Snmp Settings Configuring Snmp Community Names UsesCommunity Names Dialog Box Choose OK. The Main Menu appears 4Issue 2 December Configuring Authorized Snmp Managers Adding Authorized Manager Information ProcedurePage Snmp Settings Custom Network Interface Settings Viewing Network Settings Custom Window Fields 1Configuring LAN Hardware Parameters Custom Window Fields 2Hardware Dialog Box Hardware Dialog Box Fields DescriptionSelecting the IP Address of a Workstation Internet Address Dialog BoxSetting the Number of Subnet Mask Bits Subnet Mask Dialog BoxChoosing Port Settings Port Settings Dialog BoxPort Settings Dialog Box Fields Description Choosing Modem Settings Modem Settings Dialog BoxModem Settings Dialog Box Fields Description Specifying Dial Settings Dial Settings Dialog BoxDesignating the Default Gateway Dial Settings Dialog Box Fields DescriptionAddress mask GlssaryAgent Backup BaudBuffer ClientDaemon Dial-upDevice name DomainDSU EIAFile access File serverGateway Group idHost Host tableIcmp InternetIP address LANLog Log outManager MIBNdis Network addressNewt NFSNIC PingRAM RFCSlip SMISnmp STDTCP/IP TCPTftp User id Token ringUser name Index