5. Advanced Setup
Modulation Methods
The following modulation methods are supported by the 6212 ADSL router:
G.dmt Enabled
G.lite Enabled
T1.413 Enabled
ADSL Enabled
Annex L Enabled
ADSL2+ Enabled.
Do not change this setting unless so directed by your ISP.
Phone Line Pair
The 6212 ADSL router supports phone lines on pins 2 and 3 or pins 1 and 4 to connect your ADSL line. If your phone system uses pins 2 and 3, attach a normal RJ11 cable to the router and select "Inner pair" on the screen; if your phone system uses pins 1 and 4, attach the phone with the supplied RJ11 cable and select "Outer pair" on the screen.
Capability
The following are included under Capability:
Bitswap Enable
SRA (Seamless Rate Adaptation) Enable
Do not change these settings unless so directed by your ISP.