2. Hardware Installation and PC Setup
—If your LAN has more than one computer, you can attach one end of an Ethernet cable to a hub or a switch and the other to the LAN port of the router. Either a crossover or
4.Connect the AC power adapter to the POWER connector on the back of the device and plug the adapter into a wall outlet or power strip.
|
| RESET |
LINE PHONE | USB | LAN DEFAULT POWER |
1 |
| 4 |
2 |
| |
| 3 |
OR
Figure 2-1. Hardware Installation
5.Turn on and boot up your PC and any LAN devices, such as hub or switches, and any computers connected to them.
6.Verify that the router's LEDs are illuminated as shown in Table 3 1.