Paradyne 5216 installation instructions Pots Pair

Page 7

2.Locate the DSL pair of T1/R1 connectors on the customer premises side of the NID or punchdown block. Attach the wiring that will be connected to the DSL jack. Tighten both terminal screws with a flat-blade screwdriver.

Telephone Network Interface Device (NID)

Customer Premises

Tip

(Green)

Ring

(Red)

Wiring to

DSL Jack

Existing POTS

Wiring to

Telephone

Demarcation Point

DSL Pair

POTS Pair

DSL/POTS

Access from

Local Loop

Ground

97-15438-01

Image 7

Contents Before You Begin Wiring and Cables NeededDocument Number Document Title Package Checklist What Does the Hotwire RTU Do?DSL Access with a Pots Splitter DSL RTU Network Service ProviderCustomer Premises CP Pots Pots DSL RTU DSL Access without a Pots SplitterProcedure Installing the DSL Access WiringPunchdown Block DSL/POTS Telephone Network Interface Device NIDPots Pair POTS/DSL DSL Jack InstallationHotwire RTU Installing the RTUFerrite Condition Status Power-OnAlarm red Status LEDsLED Symptom Action TroubleshootingFirmware Download This section is reference information Cables & ConnectorsRJ11 6-Pin Connector Pin # FunctionEth ern et C ab le Lu g Pin #8 Pin #1 Specification Model 5216 RTU Technical SpecificationsImportant Safety Instructions Japan CE MarkingClass 2 ITE Declaration of Conformity EMI Warnings Warranty, Sales, and Service Information