Quatech QSC-100 user manual Windows Configuration, Windows Millennium

Page 15

5 Windows Configuration

5.1 Windows Millennium

1.After inserting the QSC 100 for the first time the "Add New Hardware Wizard" will begin. Select "Search for the best driver for your device.". Check the "Removable media" and "Specify location" box. Click the "Next" button.

3.Window will locate the proper INF file and copy the file from the CD. Click the "Next" button.

4.The final dialog screen will verify the file copy from the diskette. Click the "Finish" button.

Quatech QSC-100 User's Manual

13

Image 15

Contents QSC-100 Warranty Information Page Declaration of Conformity QTPCI.EXE General Information IND Option --- Surge Suppression Upgrade FeaturesHardware Configuration Factory Default ConfigurationEnable Scratchpad Register SPAD, J6 Clock multiplier jumper options Force High-Speed Uart Clock X2, X4, or X8, J3-J5Jumper/connector locations Hardware InstallationBase Address and Interrupt Level IRQ Address Map and Special RegistersInterrupt Status Register Enabling the Special RegistersEnhanced Serial Adapter Identification Options RegisterRR1 RR0 Clock Rate MultiplierWindows Millennium Windows ConfigurationWindows Windows Windows Page Viewing Resources with Device Manager Windows NT QTPCI.EXE DOS and Other Operating SystemsQTPCI.EXE Basic Mode display QTPCI.EXE Expert Mode display OS/2 External Connections RS-232 Port Signal INTA# PCI Resource MapSpecifications Maximum Load pF Data Rate 10% 15% 20% 25% Kbaud Trans Time Computer will not boot up TroubleshootingQSC-100 Revision June

Related manuals

Manual 32 pages 17.17 Kb