Patton electronic 1089/I user manual Service, Tel Email support@patton.com, Features, Description

Page 3

1.3 SERVICE

All warranty and non-warranty repairs must be returned freight prepaid and insured to Patton Electronics. All returns must have a Return Materials Authorization number on the outside of the shipping container. This number may be obtained from Patton Electronics Technical Service at:

tel: (301)975-1007

email: support@patton.com

www:http://www.patton.com

NOTE: Packages received without an RMA number will not be accepted.

Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Model 1089. Technical Service hours: 8AM to 5PM EST, Monday through Friday.

2.0 GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warrant- ed for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to con- tact Patton Electronics Technical Support at (301) 975-1007.

2.1 FEATURES

Provides MAC Level (Layer 2) connection between 2 peered 10BaseT Ethernet LANs

Operates transparently to higher level protocols such as TCP/IP, DECnet, NETBEUI and IPX

Automatically discovers, loads and deletes MAC addresses

Point-to-Point Connectivity over 2-Wire HDSL up to 5km

HTTP/SNMP Manageable as CP (Customer Premises) Unit with 1094ARC CO (Central Office) Rack Card

Internal or receive recovered clocking between units

LED indicators for 10BaseT Link, DSL Link, Status, No Signal, Error and Test Mode

2.2 DESCRIPTION

The NetLinkTM 10BaseT HDSL Rocket (Model 1089) is a Multi- Rate DSL Modem that provides seamless MAC Layer connectivity between 2 peered 10BaseT LANs. Now, Enterprise users no longer need to hassle with a bridge and a CSU/DSU or recurring leased line costs. The NetLink Rocket allows users to add additional nodes to a LAN that has reached its maximum distance limits or separate high traffic areas of a LAN. The Rocket connects peered LANs and auto- matically forwards and receives LAN broadcasts, multi-casts and frames across a 2-Wire DSL span.

The NetLinkTM HDSL 10BaseT Rocket features include loopback diagnostics, inband SNMP/HTTP remote management capabilities using NetLink Plug-and-Play and externally accessible configuration switches. As a symmetric DSL modem, the NetLinkTM HDSL Rocket offers the same data rates in both directions over a single pair of regu- lar telephone lines using 2B1Q modulation. The Rocket connects to the DSL line via an RJ-45 jack. Standard power options include 115VAC, 230VAC, Universal (100/240VAC) and any DC input between 36-60VDC.

3

4

Image 3
Contents User Manual Section Radio and TV InterferenceCE Notice Description ServiceFeatures Tel Email support@patton.comConfiguring the Hardware DIP Switches S2 Summary TableCO/CP Switch S3-8 Reserved Configuration Switch Set S3Switch S3-1 through S3-6 DTE Rate Switch S3-7 Reset Software DefaultsConnecting the 10Base-T Ethernet Port to a PC DTE Connecting the DSL InterfaceConnecting the 10Base-T Ethernet Port to a Hub Power Connection POWER-UPLED Status Monitors Test Modes OverviewFramer Test Mode Timing Elapsed Time seconds Symbol IndicatorsV.52 BER Test Pattern Generator Loops and PatternsClocking Modes DiagnosticsConfiguration TM Active Yellow Test Mode Enabled PowerTransmission Distance Patton NetLink Hdsl Model