Patton electronic 2720 T1 manual Eliminates Routers, Power it Anywhere

Page 1

NETLINK™ ACCESS PRODUCTS

The Patton 2720 T1 CSU/DSU terminates T1 and Fractional T1 services, and

converts to V.35, EIA-530, and 10Base-T Ethernet

Network Termination Unit

Patton 2720 T1 and Fractional T1 CSU/DSU

One of the smallest and most economical CSU/DSUs available, the Model 2720 is loaded with features usually found in more expensive units: flexible clocking modes, AMI/B8ZS coding, diagnostics, and nx56/nx64 rates—all easily configurable

through switches or VT-100 console.

The Model 2720 series terminates T1/FT1 services for all nx56/nx64 kbps to 1.544 Mbps rates and connects to the customer’s router, FRAD, CODEC, and LAN with V.35, RS-530, or 10Base-T interfaces. Front panel LEDs and switches allow for instant diagnostics and service monitoring. Use the VT-100 console port for complete command and control over your T1 termination. AC or DC power options make installing the Model 2720 into your network infrastructure a snap.

The wide variety of features, compact size, and low price make Patton’s T1 CSU/DSUs the right solution for your next network challenge. For more information, visit us at www.patton.com.

Control port

V.35, EIA-530, or

Power from universal

10Base-T interfaces

RJ-48C

AC inputs or -48 VDC

 

network connector

Connect to Any Terminal Interface

Smooth clock V.35 and EIA-530 connection, and 10Base-T Ethernet

VT-100 Control Port With Full DS0 Mapping

nx56/nx64 channel selection from 64 kbps to 1.544 Mbps

Full Diagnostics Included

V.52 511 BERT, 2047, QRSS, V.54 loopbacks, and CO loop-up/loop-down diagnostics

Eliminates Routers

Bridge Ethernet across the WAN using industry standard PPP/BCP

Standalone or Rack Solutions

Available to suit your needs: small desktop unit, or high density rack cards

Power it Anywhere

Universal input AC (90-240V), and -48 VDC power supply options

2U-high rack card has the same features and interfaces as the Model 2720

LEDs display network, data, and

Front panel switches for loops

diagnostic status at-a-glance

and test patterns

Model 2720

Model 2710RC

Image 1
Contents Eliminates Routers Power it AnywhereNetlink T1/FT1 product family Application-LAN-to-LAN without a router