Nx64 Speeds to 2.3/4.6 Mbps

NetLink™ Access Products

G.SHDSL Integrated Access

Device

Model 3086 ipRocketLink IAD

Deploy multiple managed services with the Model 3086 ipRocketLink over 2-wire standards-based G.SHDSL transmission.

User-selectable data rates for Sync-Serial, WAN, or Ethernet/IP ports. Use as a standalone or with the ForeFront Access system

Choice of V.35, X.21, or T1/E1

Get the right interface with the right connector and avoid messy adapter or crossover cables

Built-in Ethernet/IP Router Standard

With Patton’s FlexIP architecture, split the band- width and use both interfaces at the same time

Get ATM, PPP, and Frame Relay

Versatile interface options allow for simple deployment into any network environment

Interoperable with Third-Party DSLAMs

Take advantage of Patton reliability whether you connect back-to-back or to a third-party DSLAM.

LEDs and Full V.52/V.54 Diagnostics

Easy-to-access toggle switches let you test the link with built-in test modes. LEDs provide clear status at-a-glance

WWW/SNMP Manageable

Built-in VT-100 console port makes setup a snap, and you can use the embedded HTTP/SNMP agent to manage the Model 3086 from anywhere in the world.

•Simultaneous use of serial and Ethernet interfaces

•Internal universal (90–260) AC or 48V DC power

•13 LEDs show status at-a-glance

•Configure with console, Web, Telnet, or DIP-switches

•Built-in Ethernet MDI-X for

easy connections to hubs and PCs

The Patton Model 3086 ipRocketLink IAD redefines access and sets the new standard for customer premise

equipment. Based on European

Telecommunications Standardization Institute (ETSI) and International Telecommunications Union (ITU) G.SHDSL G.991.2 standard, the Patton 3086 ipRocketLink enables 2.3/4.6 Mbps speeds at nx64 (n=1..36/72) over a single pair of wires while combining standards-based transmission with Synchronous-Serial, Ethernet, and high speed IP routing…all in one compact package.

With Patton’s FlexIP™ architecture, the Model 3086 offers V.35, X.21, or T1/E1 Sync-Serial interfaces and 10/100 Ethernet ports. Integrated software selectable

DCE/DTE support eliminates messy crossover cables. The Ethernet port enables access to any IP network via ATM, PPP, or Frame Relay. Both interfaces can be simultaneously selected with user- defined bandwidth for each port.

The 3086 boasts easy installation with DIP switch, Telnet, and WWW/SNMP manage- ment. It provides bridging and routing functionality, along with advanced IP fea- tures like NAT and Firewall, and optional IPSec-based VPN. As part of Patton’s fam- ily of ipDSL products, the Model 3086 offers a complete, managed, end-to-end system when used with Patton’s central site access concentrators.

Visit www.patton.com for more informa- tion.

Model 3086 ipRocketLink IAD