Fender 63 Vibroverb owner manual TROUBLESHOOTER‘S Checklist, Line Cord, Tubes, Tolex Covering Care

Page 6

LINE CORD

Your amplifier is equipped with a grounding type supply cord to reduce the possibility of shock due to electrical fault. Be sure to connect it to a grounded receptacle. DO NOT ALTER THE AC PLUG.

TUBES

The ‘63 VIBROVERB tube complement consists of two Fender Special Design 6L6WGC/5881’s (part number 039214), five Fender Special Design 12AX7A’s (part num- ber 013341), and one Fender Special Design 12AT7 (part number 023531). Fender’s Special Design Tubes provide optimum performance in this amplifier. For best results, replace with Fender original equipment tubes only. Tube location is printed on the tube label, inside the cabinet.

TOLEX COVERING CARE

The exclusive Fender Tolex covering on your cabinet is of the same material that was used on the original VIBROVERB. A very light soapy solution on a sponge may be used to remove dirt and residue that may accumulate in the grain. Be careful not to let liquid come in contact with operating surfaces. DO NOT have the amplifier plugged into a power outlet when cleaning.

TROUBLESHOOTER‘S CHECKLIST

If the amp is set up but does not function, check the following items:

Is the amp power cord properly plugged into an electrical outlet?

Is there power at the outlet?

Is the fuse blown?

Are the speakers properly connected to the amplifier?

Is the amp on standby?

Is the amplifier volume control turned up above “three”?

Is the volume control on the instrument turned up?

Is your instrument properly plugged into the amplifier? (Eliminate any effects pedals and try another guitar cord.)

If, after checking all of the above, the system is not performing

correctly, consult your Fender Service Center.

Image 6
Contents Owner,s Manual Introduction ‘63 Vibroverb Front Panel Functions Normal Channel‘63 Vibroverb Footswitch Functions ‘63 Vibroverb Rear Panel Functions Tubes TROUBLESHOOTER‘S ChecklistLine Cord Tolex Covering Care‘63 Vibroverb Specifications

63 Vibroverb specifications

The Fender '63 Vibroverb is an iconic tube amplifier celebrated for its rich tonal qualities and vintage appeal. Launched during the 1960s, this model quickly became a staple among guitarists due to its unique sound profile, combining warm overdrive and vibrant reverb. The Vibroverb serves as a prime example of Fender's commitment to craftsmanship and innovation, making it a sought-after choice for musicians across genres.

One of the standout features of the '63 Vibroverb is its unique circuit design, which includes a pair of 6L6 power tubes. This configuration delivers a powerful yet smooth output that is ideal for blues, rock, and jazz. The amp's power rating typically hovers around 40 watts, providing sufficient headroom for gigging musicians while still allowing for pleasing power tube saturation at manageable volume levels.

The Vibroverb is equipped with an exceptional spring reverb system, often regarded as one of the best in the industry. The lush and expansive reverb tone can enhance any performance, offering an almost ethereal quality that elevates the sound. Coupled with the vibrato effect, which provides rich modulation depth, players can create a varied soundscape that ranges from subtle ambiance to dramatic swells.

In terms of build quality, the '63 Vibroverb showcases Fender’s historical commitment to durability and craftsmanship. With a sturdy cabinet design typically made from hardwood, musicians can rely on its robustness, whether for home use or on stage. The optimal speaker choice, usually a 15-inch Fender speaker, contributes to a warm and full-bodied sound that allows for resonant bass frequencies while maintaining clarity in the mids and highs.

The control panel features straightforward controls, including separate knobs for reverb and vibrato intensity, as well as tone and volume controls for treble, middle, and bass. This user-friendly layout enables players to quickly dial in their preferred settings without complicated adjustments.

Overall, the Fender '63 Vibroverb remains a legendary piece of equipment that combines vintage aesthetics with practical functionality. Its timeless sound and earthly tones continue to inspire guitarists, making it an enduring favorite in studios and stages worldwide. The Vibroverb exemplifies Fender's legacy, proving that great design and superior sound never go out of style.