Patton electronic 2616RC manual Streamline, optimize, and save, Specifications

Page 2

Streamline, optimize, and save!

Using the flexible 2616RC’s DS0 switching matrix, Service Providers can easily consoli- date, manage, and provision up to 96 T1/E1 links from a single 6476 (4U) chassis. Uplink access costs are significantly reduced by grooming and aggregating DS0 traffic from many partially used T1/E1 lines into selected outgoing T1/E1 or STM-1 links.

T1/E1

Here is how it works:

Each 2616RC comes with 16 T1/E1 ports; you select which timeslots connect to downstream or upstream lines.

Based on customer requirements, assign nx64 kbps timeslots to downstream T1/E1 links, i.e 256 kbps (4 DS0s), 512 kbps (8 DS0s), 1024 kbps (16 DS0s), etc.

Use the 2616RC GUI to map DS0s from downstream to upstream lines. For example:

4 DS0s from port 1

8 DS0s from port 2

16 DS0s from port 3

3 DS0s from port 4

All mapped to upstream E1 port 5 (31 DS0s).

T1/E1

Model 6676

nxT1/E1 connections

Any-to-any DS0 cross-connection & concentration

DS0s groomed over

from multiple sources

Non-blocking ingress & egress aggregation

user-defined egress

 

• Redundant failover

 

Specifications

 

WAN Ports

16 configurable WAN ports: T1 (AMI/B8ZS line coding) or

High Speed Midplane

Redundant, high speed, packet switched bus (PSB) and

 

 

 

E1 (HDB3/AMI line coding), G.703, G.704, G.723

 

TDM bus supporting 4096 DS0s

 

 

Ethernet Ports

10/100BaseT (RJ-45 connector); auto-negotiating; half or

Compliance

Safety: UL/CSA per UL1950 Canadian per CS-03. RTTE

 

 

 

full duplex operation for management

 

Directive 99/5/EC, Environment FCC Part 15,CE Mark,

 

 

WAN Clocking

Internal or Network (from T1/E1 WAN port)

 

CTR12, CTR13, FCC Part 68

 

 

Front Panel Indicators

Indicators LEDs for power, CPU, system, Ethernet, External

Environment

Operating temperature: 0–40°C (32–104 °F)

 

 

clock, Test mode, and WAN ports frame and error status

 

 

 

 

Humidity: 5–90% non-condensing

 

 

Management Services

HTTP, SNMP, Telnet Ethernet, RS-232 Console Port, SYS-

Dimensions

Front blade:0.75 H x 10.5 W x 6.3 D in.

 

 

LOG Client, Software upgrade via FTP

 

 

 

 

 

(1.9 H x 26.7 W x 16.0 D cm)

 

 

Alarm Reporting

Configurable alarms; Remote SNMP Traps; Front Panel LEDs

 

 

 

 

Rear blade: 0.75 H x 10.5 W x 3.15 D in.

 

 

System Clocking

Master and slave clocking sources are user-selectable and

 

 

 

 

(1.9 H x 26.7 W x 8.0 D cm)

 

 

can be derived from other system cards in the chassis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7622 Rickenbacker Drive Gaithersburg, MD 20879 USA Phone +1-301-975-1000 Fax +1-301-869-9293 E-mailsales@patton.com Web www.patton.com

07MD2616RC-DS2

Patton is a registered trademark and IPLink is a trademark of Patton Electronics Company in the United States and other countries.

Image 2
Contents Clock Synchronization Fault-Tolerant ProcessingComplete Alarm Facilities Nx64 Speeds from 64 to 2048 kbpsSpecifications Streamline, optimize, and save
Related manuals
Manual 80 pages 10.28 Kb