Patton electronic 1069 user manual Connecting the Line Interface

Page 10

3.1 CONNECTING THE LINE INTERFACE

The Interconnecting cables shall be acceptable for

external use and shall be rated for the proper applica-

tion with respect to voltage, current, anticipated tem-

CAUTION perature, flammability, and mechanical serviceability.

The Model 1069 supports communication over a distance of up to 10,000 ft (3 km) over 24 AWG (0.5 mm) twisted-pair wire or Cat5+.

Note Actual distance and link performance may vary depending on the environment and type/gauge of wire used.

Follow the steps below to connect the Model 1069 interfaces.

1.To function properly, the Model 1069 must be connected with the VDSL2 DSLAM using twisted-pair, unconditioned, dry, metal wire, between 19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through signal equalization equipment are not acceptable.

2.The Model 1069 is equipped with an RJ-45 interface jack that can be used on the VDSL2 link interface. The VDSL2 link interface is a two- wire interface. Observe the signal/pin relationships on the Model 1069's VDSL2 interface jack.

The RJ-45 connector on the Model 1069's twisted pair interface is polar- ity insensitive and is wired for a two-wire interface. The signal/pin rela- tionship is shown in Figure 4.

 

1 (no connection)

1

2 (no connection)

23 (no connection)

44 (RING)

55 (TIP)

6

6 (no connection)

7

7 (no connection)

8

8 (no connection)

Figure 4. Model 1069 (RJ-45) twisted pair line interface.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents User Manual Regulatory Model Number 03342D4-001Contents Pstn Warranty InformationRegulatory Information Radio and TV Interference FCC PartCE Declaration of Conformity ServiceAuthorized European Representative Safety When Working with Electricity Page General Information FeaturesDescription Application Model 1069 rear panelInstallation To connect the Model 1069, do the followingConnecting the Line Interface Model 1069 RJ-45 twisted pair line interfaceConnecting the 10/100BASE-T Ethernet Interface Connecting the POTS/ISDN LineConnecting Power ConfigurationFront Panel LED Status Monitors OperationLED Temperature Range LED Status IndicatorsPower Supply DimensionsPower Adapters Appendix BVDSL2 Interface Appendix C10/100BASE-T Interface POTS/ISDN Interface

1069 specifications

The Patton Electronic 1069 is a versatile and robust device widely recognized for its utility in telecommunications. It serves primarily as a CSU/DSU (Channel Service Unit/Data Service Unit), which is essential for connecting digital lines to a local area network (LAN) or directly to routers and switches. The 1069 supports T1 and E1 line standards, making it a preferred choice for businesses needing dependable digital connectivity.

One of the standout features of the Patton 1069 is its built-in line conditioning capabilities. This technology ensures that the signal remains strong and accurate, reducing errors that can occur with long-distance transmissions. Additionally, it incorporates advanced error detection and correction algorithms, enhancing the integrity of data transfer over the network.

This device is well-equipped with a user-friendly interface, allowing for easy configuration and monitoring options. The inclusion of LED indicators provides real-time feedback on the status of operations, enabling network administrators to maintain optimal performance. Furthermore, with a compact design, the 1069 is suitable for various installations, whether in a data center rack or on a desktop.

In terms of connectivity, the Patton 1069 features multiple ports, ensuring that it can accommodate various network configurations. The device supports both RJ-45 and RS-232 interfaces, which offer flexibility for different networking needs. The ability to configure settings through Telnet or a serial connection adds to its versatility, allowing for remote management options.

Security is also a priority with the 1069, which includes various protocols and encryption methods to safeguard data as it moves across the network. This capability is crucial for organizations that prioritize data protection, especially in industries dealing with sensitive information.

Overall, the Patton Electronic 1069 combines advanced technology, ease of use, and reliability, making it an essential component for enterprises looking to achieve seamless connectivity across their networks. Its adaptability to various environments and support for critical networking standards solidify its status as a trusted choice in the telecommunications arena. With its range of features and focus on performance, the 1069 remains a relevant solution in the ever-evolving landscape of digital communication.
Top Page Image Contents