Asymmetrical Line Rates

Workgroup Ethernet Extension Application

The Model 2172R multi-rate Ethernet Extenders are ideal for delivering Ethernet links to remote buildings that are beyond the 328-foot (100-meter) distance limit of Ethernet. The 100 Mbps throughput eliminates bandwidth

concerns previously experienced with other copper wired transmission tech- nologies. By utilizing existing voice grade copper pairs the expense and has- sle of installing low capacitance or fiber cable is no longer required.

Extend 10/100Base-TX Ethernet to reach
beyond its natural limitations	Office
Model 2172R
Model 2172

Pick &

place machine

Up to 800 feet (243 meters) at 100 Mbps full

duplex over voice-grade twisted-pair

Line Rates (AWG 24/0.5 mm)
Upstream in Mbps	Downstream in Mbps	Distance in ft (m)
1	4	6,000 (1,830)
1	16	4,000 (1,200)
2	50	2,000 (610)

Symmetrical Line Rates

Line Rates (AWG 24/0.5 mm)
Upstream in Mbps	Downstream in Mbps	Distance in ft (m)
10	10	4,000	(1,200)
25	25	2,000 (610)
50	50	800	(245)

EnviroNET™ models

also available

Specifications*

CopperLink line interface: RJ-45 (pin 4

=ring; pin 5 = tip); two position termi- nal block

Ethernet interface: 8-position shielded RJ-45.Auto-sensing10/100Base-T with half or full-duplex operation. DIP switch capable of disabling 100-Mbps full- duplex for equipment that does not support 802.3X (Pause Packets)

Protocol: Transparent to high layer pro- tocol. Supports 802.1Q VLAN tagging

Modulation: Quadrature Amplitude Modulation (QAM) 4-band

Duplexing Method: FDD (Frequency Division Duplexing)

Frequency Range: CopperLink: 0–12 MHz

Transmission: CopperLink line rate: Up to 100 Mbps full duplex

Surge suppression: CopperLink line tran-

sient peak surge maximum: 200A (8/20μs)

Front Panel Indicators: Power, Link,

Ethernet

Power Supply: External AC and DC

options: 120VAC, and universal input (UI)—100–240 VAC, or optional -48 VDC, -24 VDC, or -12 VDC

Compliance: FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC

Temperature

Standard: -10 to 70°C

Conformal Coated: -10 to 80°C

Humidity

Standard: Up to 90% non-condensing

Conformal Coated: 85% condensing humidity from -10 to 35°C

Dimensions: 1.5H x 4.13W x 3.75D in. (3.81H x 10.5W x 9.53D cm)

Weight: 0.4 lbs (0.18 kg) without power supply

* Specifications subject to change without notice.

07M2172R-DS1

Patton is a registered trademark of Patton Electronics Company in the United States and other countries.

	Meriedweg 7	7622 Rickenbacker Drive
CH-3172 Niederwangen		Gaithersburg, MD 20879 USA
Phone +41	(31) 985 25 25	Phone +1-301-975-1000
Fax +41	(31) 985 25 26	Fax +1-301-869-9293
E-mailsales@inalp.com		E-mailsales@patton.com
Web www.inalp.com		Web www.patton.com