Note Patton regularly adds new configuration templates to the collection at www.patton.com/voip, so if you do not see your application on the
Note If your application is unique and not covered by any of Patton’s configuration templates, you can man- ually configure the SmartNode instead of loading a configuration file template. In that case, refer to the SmartNode Series SmartWare Software Configuration Guide for information on configuring the Smart- Node device.
In this example we assume an TFTP server resides on the host with the IP address 172.16.1.11 and the configu- ration file named SN.cfg resides in the root directory of the TFTP server.
Download...100%
After you reboot the SmartNode the new startup configuration will become active.
| When you issue the reload command, the SmartNode will ask if you want to copy the |
| running configuration to the startup configuration. Since you just downloaded a con- |
| figuration file to the startup configuration you must answer this question with NO. |
IMPORTANT | Otherwise, the downloaded configuration will be overwritten and lost! |
|
|
Do you want to copy the
Press 'yes' to restart, 'no' to cancel : yes The system is going down
6.0 Additional Information
Refer to the SmartNode Series SmartWare Software Configuration Guide and the SmartNode Getting Started Guide located on the
•Installing, configuring, operating, and troubleshooting.
•Warranty, trademark & compliance
The
A.0 Customer and Technical Support
Online support: www.patton.com
6 | SmartNode 4654 & 4658 ADSL2+ Quick Start Guide |