Patton electronic 2400 Series Application-Shared-Switch Access, Specifications, Model Information

Application—Shared-Switch Access

To take advantage of emerging technologies and the	Subscribers now access new carrier services without	Instead of installing a separate PBX in a remote office,
changing regulatory environments, network service	incurring charges from the incumbent carrier.	the SmartNode is able to provide transparent extension
providers are providing new services which can be inte-	In enterprise networks, the SmartNode integrates	of PBX phones. The extension can be managed centrally
grated within the enterprise to reduce costs and improve		and benefit from services such as calling groups, least
	telephony and IP data communications for best use of
service. Deployed as a trunk gateway, the SmartNode is		cost routing, and call forwarding.
	bandwidth, improved office-to-office communication,
the seamless link between the PSTN and VoIP access.
	and reduced network costs.

Specifications

Data Connectivity

• 2 10/100Base-T Ethernet, RJ-45

Voice Signalling

•Euro ISDN EDSS-1/ETSI BRI/NET3

•ETS 300 012-1 (ITU-T I.430)

•ETS 300 402-1 (ITU-T Q.921)

•ETS 300 403-1/2 (ITU-T Q.931)

•ETS 300 102-1 (ITU-T Q.931)

•Q-SIG (PSS-1)

•ECMA-143

•ETSI and ISO/ECMA channel numbering

•SIP and MGCP

•H.323v3

•RAS, H.225, H.245

•Fast-connect, early H.245

•Gatekeeper autodiscovery

•Alias registration

•Overlap sending

•Empty capability set (call transfer, hold)

•H.323v1 call transfer, hold

•ECS support

•ISDN over IP (ISoIP)

•H.323 GW and GK compatible

•H.323 Annex M3

•ISDN/Q-SIG feature tunnelling

•ISDN speech, audio and data (Fax Gr 4, UDI 64, RDI 64)

•ISDN supplementary services

Voice Routing—Session Router™

•Local switching

•Interface huntgroups

•ISDN broadcast message routing

•Routing Criteria

•Interface

•Calling/called party number

•Time of day, day of week, date

•ISDN bearer capability

•Number manipulation functions

•Replace numbers

•Add/remove digits

•Multiple remote gateways

•PLAR

IP Routing

• IPv4 router

•RIPv1, v2 (RFC 1058 and 2453)

•Programmable static routes

•ICMP redirect (RFC 792)

•DHCP client/server

•Packet fragmentation

•Static Firewall

•NAT/PAT/NAPT (RFC 1631)

•Access control lists

IP Quality of Services

•WFQ/Fixed Rate/Priority Queuing/Flow-split scheduler

•Combination of QoS schemes with config- urable burst

•DiffServe/ToS set or queue per header bits

•Packet Policing discards excess traffic

•802.1p VLAN tagging

•Traffic classification

Management

•Industry standard CLI

•Local console (RS-232, RJ-45) and remote Telnet access

•TFTP configuration down- and upload

•TFTP firmware download

•SNMP v1 agent (MIB II and private MIB)

•Built-in diagnostic tools (trace, debug)

•Java™ Applet

•HPOV Integration with NNM

Operating Environment

•Operating temperature: 0–40ºC

•Operating humidity: 5–80% (non condensing)

System

•CPU Motorola MPC750 at 333 MHz

Memory 32MB SDRAM (160MB max.)/16 MB Flash

•Power: 100–240 VAC (50/60 Hz)

•Power dissipation 30W (fully loaded)

Compliance

•EMC compliance: EN55022 and EN55024

•Safety compliance: EN 50950

•CE compliance

•FCC Part 15 Class A

Model Information

SN2400/0V/UI VoIP Media Gateway router with internal 100–240 VAC power supply SNSW-IAF-4IP Advanced Feature Set (Q-SIG,QoS, IP Classification)

	Meriedweg 7	7622 Rickenbacker Drive
	CH-3172 Niederwangen	Gaithersburg, MD 20879 USA
	Phone +41(0)31 985-25-25	Phone +1-301/975-1000
	Fax +41(0)31 985-25-26	Fax +1-301/869-9293
	E-mailsales@inalp.com	E-mailsales@patton.com
	URL http://www.inalp.com	URL http://www.patton.com
07M2400-DS1