Patton electronic 3101 quick start Log in via web browser, Launch a Web browser on your computer

Page 4

PC

Power

4

Eth

3

Eth

2

Eth

1

Eth

Reset

Line

Ethernet port

Connect to LAN or Ethernet port

Figure 1. Connecting the ipRocketLink to the PC’s serial port

2.2 Log in via web browser

1.Launch a Web browser on your computer.

2.Browse to “http://192.168.1.1” (the 3101’s default IP address).The login page displays.

3.Enter a username and password. The default superuser username and password are both admin. The default operator/common username and password are both user. It is recommended to change these default values after logging into the 3101 for the first time.

4.Click OK to login, or click Cancel to exit the login interface.

5.Click Advanced Setup > WAN to configure, modify, and remove WAN interfaces. Contact your ISP for

WAN configuration requirements.

4

Model 3101 Series Quick Start Guide

Image 4
Contents ADSL2/2+ Router Far end connection first Power up the router Configure the IP addressPower up Connect the AC adaptorLog in via web browser WAN configuration requirementsLaunch a Web browser on your computer Additional Information Connect the Adsl portCustomer and Technical Support EN55022, Class a EN55024 Safety IEC/EN60950-1, 2nd Edition Compliance InformationCompliance CE Declaration of ConformityWarranty, Trademark, & Compliance Information Model 3101 Series Quick Start Guide