Patton electronic 4950 Power up the SmartNode, Connecting the SmartNode to your laptop PC

Page 3

Electrostatic Discharge (ESD) can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the follow-

CAUTION ing to prevent ESD:

•Always follow ESD prevention procedures when removing and replac- ing cards.

•Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the chassis frame to safely channel unwanted ESD voltages to ground.

•To properly guard against ESD damage and shocks, the wrist strap and cord must operate effectively. If no wrist strap is available, ground yourself by touching the metal part of the chassis.

1.0Power up the SmartNode

1.Insert the barrel type connector end of the AC power cord into the external power supply connector.

2.Insert the female end of the power cord into the internal power supply connector.

3.Verify that the AC power cord included with your router is compatible with local standards. If it is not, con- tact Patton to replace it with a compatible power cord.

4.Connect the male end of the power cord to an appropriate power outlet.

5.Wait until the Power LED stops blinking and remains constantly lit. Now the SmartNode is ready to configure.

2.0 Connecting the SmartNode to your laptop PC

The interconnecting cables shall be acceptable for external use and shall be rated for the proper application with respect to voltage, current, anticipated temperature, flam- mability, and mechanical serviceability.

CAUTION

SmartNode 4950 Series Quick Start Guide

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Multi-Port T1/E1/PRI VoIP Enterprise Gateway Router Cord is connected Connecting the SmartNode to your laptop PC Power up the SmartNodeFactory-default IP settings Configuring the desired IP addressConnecting the SmartNode to the network LoginChanging the WAN IP address Connecting the SmartNode to the network Loading the configuration optionalAdditional Information Customer and Technical Support Compliance InformationCompliance Radio and TV interference FCC Part 68 Acta StatementIndustry Canada Notice EG-Konformitätserklärung EC Declaration of ConformityWarranty, Trademark, & Compliance Information SmartNode 4950 Series Quick Start Guide

4950 specifications

The Patton Electronic 4950 is a versatile and robust solution designed for businesses seeking to optimize their network connectivity and enhance data transmission capabilities. This device combines advanced technologies and sophisticated design, making it suitable for both small and large-scale deployments.

One of the standout features of the Patton 4950 is its ability to support multiple communication protocols, allowing seamless integration into existing network architectures. It is equipped with both VoIP (Voice over Internet Protocol) and traditional telephony interfaces, enabling businesses to transition smoothly to modern communication solutions without losing their existing infrastructure investments.

The 4950 model leverages advanced digital signal processing technology, ensuring high-quality voice transmission with minimal delay and distortion. This is particularly beneficial for businesses that rely heavily on telecommunication and customer interaction. The device is designed to minimize latency, providing users with a clear and responsive communication experience.

In terms of security, the Patton 4950 is equipped with robust encryption protocols, safeguarding sensitive data during transmission. This feature is crucial for enterprises that handle confidential information and need to comply with various regulatory standards. The device also includes firewall capabilities, adding an extra layer of protection against potential cyber threats.

The Patton 4950 boasts impressive scalability, making it suitable for organizations of all sizes. Whether a company is just starting with a few users or expanding to numerous locations, the device can accommodate changing demands. Its modular design allows for easy upgrades and expansions, ensuring that businesses can adapt their infrastructure as needed without significant additional investment.

Another notable characteristic is its user-friendly interface, which simplifies the configuration and management processes. IT administrators can easily navigate the setup options, allowing for rapid deployment and reduced downtime. Additionally, the device supports remote management capabilities, enabling IT teams to monitor and maintain systems from anywhere.

In summary, the Patton Electronic 4950 is a comprehensive solution blending advanced voice and data technologies with a focus on security, scalability, and ease of use. This makes it an excellent choice for businesses looking to enhance their communication systems and support growth while ensuring reliable and secure data transmission. With its versatile features and robust design, the Patton 4950 is poised to meet the evolving needs of modern enterprises.
Top Page Image Contents