Patton electronic 1000RC user manual Factory Replacement Parts, Patton Model # Description

APPENDIX C

FACTORY REPLACEMENT PARTS

The Patton Model 1000RC rack system features interchangeable rear half cards, power cords/fuses for international various operating environments and other user-replaceable parts. Model numbers and descriptions for these parts are listed below:

Patton Model #	Description
1000RPEM	120/240V Rear Power Entry Module
1000RPSM-1	120/240V Front Power Supply Module
1000RPEM-DC	DC Rear Power Entry Module
1000RPSM-48A	48V Front Power Supply Module
0805US	American Power Cord
0805EUR	European Power Cord CEE 7
0805EURP	Europlug Power Cord CEE 7/16
0805UK	United Kingdom Power Cord
0805AUS	Australia/New Zealand Power Cord
0805DEN	Denmark Power Cord
0805FR	France/Belgium Power Cord
0805IN	India Power Cord
0805IS	Israel Power Cord
0805JAP	Japan Power Cord
0805SW	Switzerland Power Cord
0516FPB1	Single Width Blank Front Panel
0516FPB4	4-Wide Blank Front Panel
0516RPB1	Single Width Blank Rear Panel
0516RPB4	4-Wide Blank Rear Panel
056S1	Set of 16 #4 pan head screws/washers

APPENDIX D

INTERFACE SETTINGS & ORIENTATION

PATTON MODULAR INTERFACE - 10 Wire RJ-45

Contact Number	Circuit	Description
1	N/A	Not Used
2	125	DSR
3	109	Received Line Signal Indicator (CD)
4	108 / 2	DTE Ready (DTR)
5	102	Signal Common
6	104	Received Data
7	103	Transmitted Data
8	106	Clear to Send
9	105 / 133	Request to Send / Ready for Receiving
10	N/A	Not Used

Pins 2-9 conform to the EIA/TIA-561 eight position non-synchronous interface standard.

For all modular jacks (6, 8 or 10 position): Pin 1 is always toward the bottom when the rear card is oriented correctly in the slot

15 16