Targus 410-2217-001A warranty Introduction, Contents, System Requirements, Troubleshooting

Page 2

Targus 4-Port USB 3.0 Hub

Introduction

Thank you for your purchase of the Targus 4-Port USB 3.0 Hub. This hub allows you to connect up to 4 USB 3.0 devices such as hard drives, flash drives, printers and more.

Contents

• Targus 4-Port USB 3.0 Hub

• AC adapter

• USB cable

• User Guide

System Requirements

Hardware

• USB interface

Operating System

• Microsoft Windows® XP

• Microsoft Windows® 7

• Microsoft Windows Vista®

• Mac OS® X 10.4 or later

Connecting the Hub to Your Computer

This hub is a plug and play device. It will automatically operate when the USB cord is connected to the computer.

AC adapter

Electrical Rating

Input: 100 - 240V ~

Output: 5V = 4A

NOTE: THE INCLUDED AC ADAPTER IS OPTIONAL AND ONLY NEEDED WHEN PLUGGING IN DEVICES THAT REQUIRE MORE POWER.

Targus 4-Port USB 3.0 Hub

Troubleshooting

Device Not Working

Make sure that the device is fully inserted into the correct port on the

4-Port USB 3.0 Hub.

Plug the device into a different port on the USB Hub. If it still doesn’t work, test the device by connecting it directly to your computer.

Verify that you ran the Setup or Install program for the device.

Make sure that the device appears in Device Manager.

Disconnect all devices from the hub and reconnect them, one at a time. Check that each device works before plugging in the next one.

Each USB port is equipped with over-current protection. Should a USB device draw more current than the USB port can supply, the port will shut down.

To re-enable the port, unplug the device and go to Device Manager or to the message in the system tray and choose the Reset option. You can then plug the device back into the USB port. If a shut down reoccurs, check the power requirements of the device.

Verifying Devices are Installed

You can view the devices installed on the 4-Port USB 3.0 Hub from the Device Manager window in System Properties.

Right-click My Computer, Properties, then click the Hardware tab, and then the Device Manager button.

2

 

3

Image 2
Contents User Guide Troubleshooting ContentsConnecting the Hub to Your Computer Verifying Devices are InstalledProduct Registration WarrantyTechnical Support Regulatory Compliance