Targus PAUM30U / 400-0110-001C Connecting the Receiver and Installing the Default Driver

Page 4

Targus Wireless Remote Presenter

System Requirements

To use the presenter, your computer must meet the following hardware requirements and run one of the operating systems listed below.

Hardware

Operating System

PC with an Intel® Pentium® processor or equivalent and a hard disk drive

At least 64 MB RAM

USB interface

Windows® 98

Windows® Me

Windows® 2000

Windows® XP

Connecting the Receiver and Installing the Default Driver

To connect the receiver to your computer, plug the standard USB end of the receiver into an available USB port on your computer. Alternatively, you can use the supplied USB extension cable to connect the receiver to your computer for additional length.

Your computer’s operating system identifies the receiver as a “USB Human Interface Device” and begins installing the default driver. Follow any on-screen procedures to complete the default driver installation.

NOTE: If you are running the Windows® 98/Me operating system, you may be prompted to insert the installation CD-ROM that came with your computer.

You are now ready to begin using the presenter.

4

Image 4
Contents USER’S Guide Page Targus Wireless Remote Presenter IntroductionSystem Requirements Connecting the Receiver and Installing the Default DriverHardware Button Mouse Mode Using the Targus Wireless Remote PresenterChanging Modes Specifications Safety MeasuresElectrical/Presenter InterfaceReceiver Troubleshooting ID button ReceiverAustralia Technical SupportNew Zealand Warranty Product RegistrationRegulatory Compliance FCC StatementTargus Wireless Remote Presenter