Targus Wireless Keypad & Mini Optical Mouse specifications Operating Hints

Page 8

Targus Wireless Keypad & Mini Optical Mouse

To save battery power, turn off the keypad and mouse while traveling or when you’re not using them.

CAUTION: Removing the batteries will require you to reset the ID code.

Operating Hints

For optimal performance and RF reception:

Place the receiver at least 8 inches (20 cm) away from all electrical devices, such as your monitor, speakers or external storage devices.

If necessary, use the supplied extension cable to keep the receiver away from the computer. Plug the receiver into the extension cable, and the extension cable to the computer.

Avoid using the optical mouse on a metal surface. Metals, such as iron, aluminum or copper, shield the radio frequency transmission and may slow down the mouse’s response time or cause the mouse to fail temporarily.

The mouse will enter a suspend mode at the same time your computer does. To activate the mouse, press any of the buttons.

If your computer has a metal case that contains aluminum or magnesium, use the optical mouse to the side. The display panel may interfere with the radio frequency signal if you use the mouse directly in front of the computer.

Never use the optical mouse on a glass or mirrored surface as these surfaces will cause the mouse to fail temporarily.

To maximize battery life, use the optical mouse on a white, or light colored surface. Dark surfaces cause the mouse’s

8

Image 8
Contents Targus Wireless Keypad & Mini Optical Mouse Contents IntroductionInstalling the Batteries System RequirementsOptical Mouse HardwareWireless Keypad Connecting the Receiver Setting the Identification CodeOptical Mouse Using the Keypad Power ManagementActivate Num Lock LED illuminated Deactivate Num LockOperating Hints Things to Remember Comfortable UsageBatteries GeneralSpecifications Power Saving ModeTroubleshooting What do I do if the mouse does not work?Replace the batteries Technical Support AustraliaCanada New ZealandWarranty Product RegistrationRegulatory Compliance FCC StatementDeclaration of Conformity