Targus Multi-Channel Mouse Troubleshooting, What do I do if the mouse does not work?

Targus Wireless Multi-Channel Mouse

Batteries	1 internal lithium polymer
Operating Current	Mouse:
	35mA or lower
	Receiver:
	30mA (typical) (100mA maximum)
Mouse Standby
Current	4.5 mA (for 30 seconds of non-operation)
Mouse Flash Mode	Below 2.8mA (for 20 minutes of non-
Current	operation)
Mouse Sleep Mode
Current	Below 8µA
Modulation Type	FSK
Transmission Rate	5K bps
Transmission Type	Digital radio frequency
Error Detection	8-bit CRC

Troubleshooting

What do I do if the mouse does not work?

•Make sure that the mouse is fully charged.

•Verify that your computer’s power management feature is turned off.

•Check that the receiver’s USB connector is firmly attached to the USB port on your computer.

•Make sure you have established a radio link between the mouse and its receiver. See “Establishing a Communications Link” on page 4.

10