For Windows Vista

Targus USB Ultra-Mini Bluetooth® 2.0 Adapter with EDR

1 Insert the driver software CD into your computer’s CD-ROM drive.

2 If setup does not begin automatically, click Start, Run, then enter D:\install.exe (where D: is the path of your disc drive) and then click OK.

3 The installation screen will appear and choose Window’s version (Windows Vista) on the setup screen. Click Next.

NOTE: FOR WINDOWS VISTA USERS, A “USER ACCOUNT CONTROL” WINDOW APPEARS, PLEASE CLICK THE “ALLOW” BUTTON.

4 The “No Bluetooth device was detected” window appears. Insert the USB Bluetooth adapter in the USB port.

5 Follow the on-screen instructions.

6 Click Next.

7 Click Finish.

NOTE: BLUETOOTH SPECIFICATION VERSION 2.1 WILL BE AVAILABLE SOON VIA DRIVER UPDATE. TO CHECK THE AVAILABILITY OF THE LATEST DRIVER, GO TO: http://www.targus.com

Verifying the Adapter is Installed

After installing the adapter software (for Windows 2000/XP):

1 Click Start/Settings/Control Panel/System/Hardware/Device Manager.

2 Check under ‘Bluetooth Devices’ that a ‘Broadcom 2046 Bluetooth 2.1 USB UHE Dongle’ is installed.

After installing the adapter software (for Windows Vista):

1 Click Start/Control Panel/Hardware/Device Manager.

2 Check under ‘Bluetooth Radios’ that a ‘Broadcom 2046 Bluetooth 2.1 + EDR USB Dongle’ is installed.

If the information is not present:

1 Unplug the adapter.

2 Plug the adapter into the USB port to initiate the driver. Verify that the adapter is installed.

You are now ready to configure the Bluetooth.