INSTALLING THE SOFTWARE
Note: The USB - PS/2 Scroller Mini Mouse is automatically detected and enabled with Windows NT and Windows 2000; therefore software installation is not required.
1Insert the scroller mini mouse software diskette into drive A or B.
2Open the Start menu ( Ctrl plus Esc), and select Run.
3Type A:Setup.exe (or B:Setup.exe) in the command line.
4Click OK.
5Follow the screen prompts until installation is complete.
6Restart the computer.
7Open the Start menu and select Settings.
8Select Control Panel and
The Mouse Properties window appears. Across the top of this menu are the categories of features provided. You can set and reset these features to suit your needs.
USING THE MOUSE
Note: The enhanced features described in the following sections are not available with Windows NT or Windows 2000. For future enhancements, visit our Web site at www.targus.com.
You can assign frequently used mouse and keyboard functions to the mouse buttons with the Button Assignment feature. Microsoft Office 97 is supported with a new
Factory Settings
Some functions performed by the mouse buttons, scroller wheel, and scroller button are preassigned at the factory.
Screen scroller | Moves the cursor when you roll the wheel |
Scroller button | No factory setting |
Left button | Primary button which provides click, |
| |
Right button | Secondary button with no factory setting |
| 3 |