TP-Link TL-WN350GD manual Configuration, Current Status

TL-WN350G/TL-WN350GD

54M Wireless PCI Adapter User Guide

Chapter 3 Configuration

TP-LINK Wireless PCI Adapter TL-WN350G/TL-WN350GD can be configured by TP-LINK Wireless Client Utility (TWCU). This chapter describes how to configure your TP-LINK Wireless PCI Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security encryption features.

After Installing the Adapter, the Adapter’s tray icon will appear in your system tray. It appears

at the bottom of the screen, and shows the signal strength using color and the received signal strength indication (RSSI).

If the icon is gray, there is no connection.

If the icon is red, there is poor signal strength and the RSSI is less than 5dB.

If the icon is yellow, there is poor signal strength and the RSSI is between 5dB and 10dB.

If the icon is green, there is good signal strength and the RSSI is between 10dB and 20dB.

If the icon is green, there is excellent signal strength and the RSSI is more than 20dB.

Double-click the icon and the TWCU will run. You can also run the utility by clicking the Start>Program>TP-LINK>TWCU>TP-LINK Wireless Client Utility. The TWCU provides integrated and easy tools to:

¾Display current status information

¾Edit and add configuration profiles

¾Display current diagnostics information

The section below introduces these above capabilities.

3.1Current Status

The Current Status tab contains general information about the program and its operations. The Current Status tab does not require any configurations.

13