TP-Link TTL-WN751N manual To connect using WPS, PBC Push Button Configuration method

TL-WN751N/TL-WN751ND

150Mbps Wireless N PCI Adapter

Figure 3-6

3.2To connect using WPS

WPS (Wi-Fi Protected Setup) function allows you to add a new wireless device to an existing network quickly.

If the wireless router supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between wireless card and router using either Push Button Configuration (PBC) method or PIN method.

3.2.1 PBC (Push Button Configuration) method

1.Press the WPS/RESET button for 2~3 seconds on the back panel of the router. Here takes router TL-WR841ND for example.

2.Open TWCU and click WPS tab. Select Push the button on my access point or wireless router and then click Connect.

11