Remove a profile, Switch another Profile

TL-WN781ND150Mbps Wireless Lite N PCI Express Adapter

This mode also allows the selection of the channel that the Wireless Adapter uses. The channels available depend on the regulatory domain. If the adapter finds no other ad hoc adapters, the channel that the adapter starts the ad hoc network with will be selected automatically. The Adapter must match the wireless mode and channel of the clients it associates.

¾802.11 Authentication Mode: Select which mode the Adapter uses to authenticate to an access point:

•Auto - Automatic causes the adapter to attempt authentication using shared, but switches it to open authentication if shared fails.

•Open - Open System enables an adapter to attempt authentication regardless of its WEP settings. It will only associate with the access point if the WEP keys on both the adapter and the access point match.

•Shared - Shared-key only allows the adapter to associate with access points that have the same WEP key.

For infrastructure (access point) networks, click Preferred APs… to specify four access points at most to the client adapter that attempts to be associated to the access points. The four access points have different priorities; the frontal has the higher priority.

Figure 3-7

3.1.2.2. Remove a profile

1.Go to the Profile Management tab (shown in Figure 3-2).

2.Select the profile name in the Profiles List.

3.Click Remove.

)Note:

The profile being used can’t be removed.

3.1.2.3. Switch another Profile

1.Go to the Profile Management screen (shown in Figure 3-2).

2.Select the profile name required in the Profiles List.