TP-Link TL-SG5428, TL-SG5412F 2222Installation Tools, 2222Product Installation, Installation Site

Page 11

L2 Managed Switch

protection measures should be taken.

Ensure the rack and device are well earthed.

Make sure the power socket has a good contact with the ground. Keep a reasonable cabling system and avoid induced lightning.

Use the signal SPD (Surge Protective Device\ when wiring outdoor.

Note: For detailed lightning protection measures, please refer to Chapter 3

Lightning Protection.

Installation Site

S

When installing the device on a rack or a flat workbench, please note the following items:

The rack or workbench is flat and stable, and sturdy enough to support the weight of 5.5kg at least.

The rack or workbench has a good ventilation system. The equipment room is well ventilated.

The rack is well grounded. Keep the power socket less than 1.5 meters away from the device.

2222Installation Tools

Phillips screwdriver

ESD-preventive wrist wrap Cables

Note: These tools are not provided with our product. If needed, please self purchase them.

2222Product Installation

Desktop Installation

To install the device on the desktop, please follow the steps below:

111 Set the device on a flat surface strong enough to support the entire weight of the device with all fittings.

222Remove the adhesive backing papers from the rubber feet.

Installation 06

Image 11
Contents Installation Guide Copyright & Trademarks FCC Statement Related Document Audience Contents Front Panel CCCCCCCCCCCIntroductionProduct Overview AppearanceLEDs for TL-SG5428 10/100/1000Mbps RJ45 Port Rear Panel2222Safety Precautions CCCCCCCCCCCInstallationPackage Contents Lightening Protection ClearnessElectromagnetic Interference Desktop Installation 2222Installation Tools2222Product Installation Installation SiteRack Installation Requirements for Cabling Indoors CCCCCCCCCCCLightning ProtectionCabling Reasonably Requirements for Cabling OutdoorsEthernet Cable 3333Connect to Ground Connecting to the Grounding BarConnecting to the Ground via the Power Supply 3333Equipotential Bonding 3333Use Lightning Arrester 4444SFP Port CCCCCCCCCCCConnectionEthernet Port Optical fiber 4444Console Port 4444Verify Installation4444Power On 4444Initialization Configure the Switch via GUI CCCCCCCCCCCConfigurationLogon by a Console Port 5555Configure the Switch Using CLIFFFFFFFFFFFFSelect the port to connect Logon by Telnet FFFFFFFFFFFFFLog in the Switch Qqqq Why does the Power LED work abnormally? AAAAAAAAAAAATroubleshootingAAAAAAAAAAAAHardware Specifications AAAAAAAAAAAATechnical Support Tplink Page Tel +86 755 Mail support@tp-link.com 7106503848 Rev

TL-SG5428, TL-SG5412F specifications

The TP-Link TL-SG5428 and TL-SG5412F are advanced Ethernet switches designed to meet the demands of growing networks, offering robust performance, scalability, and a suite of features for simplified management. These devices are tailored for both medium-sized businesses and enterprise environments, ensuring reliable and efficient data transfer across connected devices.

The TL-SG5428, a 28-port Gigabit L2 Managed Switch, is equipped with 24 Gigabit Ethernet ports and 4 SFP (Small Form-Factor Pluggable) slots for fiber uplink. This versatility allows for high-speed connections to servers, storage devices, and other network components, enhancing overall network performance. In contrast, the TL-SG5412F features 12 Gigabit Ethernet ports, also complemented by 4 SFP slots, making it an ideal choice for smaller setups or branch offices.

One of the prominent features of both models is their support for advanced Layer 2 management, which includes VLAN (Virtual Local Area Network) support for improved network segmentation and security. This capability helps in organizing network traffic effectively and limits broadcast storms, ultimately enhancing network efficiency. Additionally, both switches support Link Aggregation Control Protocol (LACP), allowing multiple ports to be combined for increased bandwidth and redundancy.

Power over Ethernet (PoE) technology is another key aspect of these models. The TL-SG5428 and TL-SG5412F can deliver power to connected devices such as IP cameras, phones, and access points through the Ethernet cable, simplifying installation and reducing cable clutter. This feature is particularly beneficial in environments where power outlets may be limited or difficult to access.

Security features are also paramount in both switches. They come with 802.1X authentication to prevent unauthorized access and support for Access Control Lists (ACLs) to further protect sensitive data. Moreover, the switches have a robust web-based management interface and support SNMP (Simple Network Management Protocol), allowing for easy monitoring and configuration.

In terms of quality of service (QoS), both models can prioritize network traffic effectively using various algorithms, ensuring that critical applications receive the necessary bandwidth, which is crucial for maintaining the performance of voice, video, and data services.

In summary, the TP-Link TL-SG5428 and TL-SG5412F are versatile, feature-rich switches that provide essential tools for managing and optimizing network performance. With their combination of advanced security, PoE capabilities, and efficient traffic management, they are well suited for dynamic networking environments, ensuring reliable and scalable network solutions for businesses of all sizes.