TP-Link TL-WDN4800 guide

TL-WDN4800450Mbps Wireless N Dual Band PCI Express Adapter User Guide

)Note:

You will see Figure 4-2 if you selected the security type WPA-PSK/WPA2-PSK; while, if you selected the security type WPA/WPA2, Figure 4-3 will be displayed.

¾Encryption Type: From the drop-down menu, select the encryption type that is the same as on your Router or access point.

¾Security Key: Enter the passphrase exactly as it is on your wireless Router or access point. Click the Show characters box to see the passphrase, or uncheck this box to hide it.

¾Authentication: Select a type of authentication, either certificate or password.

¾Certificate: If you select certificate as your Authentication, then you need to specify your certificate from the drop-down list here.

¾Start this connection automatically: Check this box to automatically connect to this network next time.

¾Save: Click Save to save your settings.

Having completed the above settings, the Profile page should look like the following figure. To connect to a desired network, just highlight the network you would like to connect to and click the Connect button on the bottom of the window. Then click OK in Figure 4-5 to activate the profile.

Figure 4-4

Figure 4-5