Field Verified | Configuration Guide |
|
|
Access Point Configuration
The following AP configuration steps need to be repeated for each AP radio that you are planning to use with VoIP.
1.Connect to the AP using the Web browser interface. Consult the access point documentation for details.
2.Go to IEEE 802.11B Radio and set the SSID (Network Name) on the AP the same as the setting for the SpectraLink 8000 Wireless Telephones.
3.Go to IEEE 802.11B Radio: Advanced Configuration and set Data/Voice Settings option to Data and SpectraLink Traffic.
4.Go to IEEE 802.11B Radio: Advanced Configuration and set the Basic Rate to 11Mb/s.
5.Go to Spanning Tree Settings: Global Flooding, set Multicast Flooding to Universal (Inbound)
6.Save changes and reboot.
The AP is now ready for use with SpectraLink 8000 Wireless
Telephones.
6 | PN: |