Using Other Peripherals

1.To show content using the computer, make sure the computer video is configured to the same resolution and refresh rate as the Polycom system.

2.The Elmo is connected to the computer using a USB cable. Therefore the content shown on the document camera (Elmo) is displayed on the computer screen and can be used with any program on the computer.

3.Press the blue ImageShare selection button to start and stop displaying content from the computer or document camera.

4.To show a VCR/DVD, make sure the VCR/DVD is powered on before the call is placed. Press Camera on the remote control and select a video source. Press Enter on the remote control, then Home to save settings and return to the Place a Call screen.

5.To switch back to camera, press Camera on the remote control and select Camera for the video source. Follow steps above to save changes.

6.To use the document camera, the program loaded on the teacher’s computer, must be started before content can be sent using the document camera.