System Setup, Speaker setup and testing, Headphones

SUBWOOFER	FRONT
	LEFT

SURROUND

(REAR)

LEFT

CENTER

FRONT

RIGHT

SURROUND

(REAR)

RIGHT

SYSTEM SETUP

Speaker setup and testing

The relative volume of the speakers must be adjusted for optimal surround sound. You should be at your usual listening position when adjusting the speaker volume. See “Receiver menus” on how to set up the receiver for the used speakers.

1	Press POWER / STANDBY to switch on the receiver.
2	Press TEST TONE on the remote control.
	y A test tone coming from the different speakers, except

English

Positioning of the speakers

General hints for positioning

Avoid positioning the speakers in a corner or on the floor as this will boost the bass tones too much. Placing the speakers behind curtains, furniture, etc. will reduce the treble response. The listener should always be able to ”see” the speakers.

Each room has different acoustic characteristics and the positioning possibilities are often limited. You can find the best position for your speakers by referring to the picture above.

As a minimum we recommend 5 speakers (2 front, a center, 2 surround) for good surround sound. It is possible to reproduce some kind of surround sound with fewer speakers. This is done by redirecting the signals which are foreseen for the missing speakers to the existing ones. See “Menus” on how to set up the receiver correctly for the number and size of the speakers used.

Positioning the front speakers

The front speakers should be placed right and left in front of the listening position like usual stereo speakers.

Positioning the center speaker

The center speaker should be placed in the center between the two front speakers, e. g. underneath or on top of the TV. The best height for the center speaker is the height of the listener’s ears (while seated).

Positioning the surround speakers

The surround speakers should face each other and be in line with, or slightly behind the listener.

Positioning the subwoofer

A subwoofer can be used to enhance the bass performance of your system dramatically. The subwoofer can be positioned anywhere in the room, because it is not possible to locate the source of deep tones. Nevertheless, you should not place the subwoofer in the middle of a room, since the bass could be severely weakened. Do not place any object on the subwoofer.

	the subwoofer, is heard.
3	Press +/- REAR on the remote control to
	increase/decrease the volume of the actual speaker. The
	best result is achieved when all speakers have equal
	volume in the listening position.
4	Press TEST TONE on the remote control.
	y The test tone stops.

Note: If you are not completely satisfied with the volume settings, we recommend making minor adjustments to them during surround sound playback.

Power handling

If the receiver is used at very high power it can produce distortions which may seriously damage your speakers. If distortions occur, reduce the volume and the tone controls to a level where the sound is acceptable again.

To avoid overheating of the set a safety circuit has been built in. Therefore your set may disconnect under extreme conditions. If this happens, switch the set off and let it cool down before reusing it.

Headphones

Connecting headphones to PHONES will switch off the speakers. The receiver switches to STEREO and surround sound will be reduced to a stereo signal which is reproducible by standard headphones.

Disconnecting the headphones switches on the speakers again. If you wish to enjoy surround sound again, switch the receiver back to surround sound.

FR970 specifications

The Philips FR970 and FR960 are both advanced robotic vacuum cleaners designed to provide consumers with convenient and efficient cleaning solutions. These models combine state-of-the-art technology and user-centered features aimed at simplifying household cleaning tasks.

The FR970 is equipped with a powerful suction system that effectively captures dust, dirt, and pet hair from various floor types including carpets, tiles, and hardwood. Its suction power is complemented by an array of sensors that help the robot navigate around obstacles, ensuring thorough coverage of your home without getting stuck. One of its standout features is the Smart Detect technology, which allows the vacuum to identify high-traffic areas that need more attention and adjust its cleaning pattern accordingly.

A notable feature of the FR970 is its mapping capability. Utilizing advanced navigation technology, the robot creates a map of your home, enabling it to plan its cleaning route more efficiently. This not only improves cleaning performance but also minimizes the chance of missing spots. Users can also benefit from the scheduling function, allowing them to set cleaning times according to their convenience, ensuring a consistently clean environment with minimal effort.

On the other hand, the Philips FR960 shares many of these advanced features, but is typically available at a more budget-friendly price point. The FR960 also utilizes intelligent mapping technology and Smart Detect capabilities, but may have slightly lower suction power compared to the FR970. This model is designed to deliver efficient cleaning in a more economical package, making it suitable for those who want advanced robotic cleaning without breaking the bank.

Both models come with easy-to-use interfaces, often controllable via a smartphone app. This integration allows users to monitor cleaning progress, adjust settings, and receive notifications directly on their mobile devices. Additionally, they come equipped with washable filters, promoting a longer lifespan and ease of maintenance.

In summary, the Philips FR970 and FR960 robotic vacuum cleaners stand out due to their intelligent features, efficient cleaning systems, and user-friendly management options. They cater to various cleaning needs and preferences, making them excellent choices for anyone looking to automate their home cleaning routine. Whether you opt for the higher-end FR970 or the cost-effective FR960, both models promise a clean home with minimal effort.