Call Hold and Call Transfer

This guide describes how put a call on hold and how to transfer a call on your handset when operating on a SIP call handler and when supported on KIRK Wireless Server 600v3.

The guide is intended for end users and provides information about activating call hold and call transfer on your handset specific for your call handler.

Contact your system administrator for informaton about your call handler and wireless server.

For more information about the handset in general, refer to the Handset User

Guide.

This section includes information about activating:

•“Call Hold” on page 1-1

•“Call Transfer” on page 1-1

Call Hold

Use this feature to hold a call. A call may be placed on hold, in which case the connection is not terminated but no verbal communication is possible until the call is removed from hold.

On your handset, do the following:

•While on call, press R. The call is now on hold.

Call Transfer

Use this feature to transfer a call to another handset by dialing a new number/extension. The transferred call can be either attended, semi-attendedor blind. If the transferred call is attended, the desired number/extension is notified of the impending transfer (the caller is put on hold). If the transferred

1–1