TP-Link manual TL-PS110PSingle Parallel Port Fast Ethernet Print Server

TL-PS110PSingle Parallel Port Fast Ethernet Print Server

Figure 3-31

11.Enter the “Internet Protocol (TCP/IP) Properties” page as shown in Figure 3-32.Fill in the following parameters.

¾IP Address: Specify an IP address for your adapter. The IP address must be within the same subnet as your Router. For example, if the LAN IP address of your Router is 192.168.1.1, the IP address should be set to 192.168.1.X (1<X<10 or 10<X255, for 192.168.1.10 has been specified for your print server). Here we take 192.168.1.101 for example.

¾Subnet Mask: Enter the subnet mask of your network.

¾Default Gateway: Enter the LAN IP address of your wireless router or access point. Here takes 192.168.1.1 for example.

20