Play from radio
The home theater can store up to 40 radio stations.
1Check that the FM antenna is connected.
2Press 
.
»“AUTO INSTALL...PRESS PLAY’ appears on the display panel if you have not installed any radio stations. Press 
.
3Press the following buttons to control play:
Button | Action |
/ | Selects a preset radio station. |
/ | Searches for a radio station. |
Fine tunes a radio frequency.
Press and hold to erase the preset radio station.
Press to stop the installation of radio stations.
Manual: Press once to access program mode, and press again to store the radio station. Automatic: Press and hold for ve seconds to reinstall radio stations.
Note
•AM and digital radio are not supported.
•If no stereo signal is detected, or if fewer than ve stations are found, you are prompted to install the radio stations again.
•For the best reception, place the antenna away from the TV or other sources of radiation.
Change tuning grid
In some countries, you can switch the FM tuning grid between 50 kHz and 100 kHz. Changing tuning grid erases all preset radio stations.
1Press 
.
2Press 
.
3Press and hold 
until ‘GRID 9’ (50 kHz) or ‘GRID 10’ (100 kHz) is displayed.
Play audio fromTV or other devices
Press 
repeatedly to select the audio output of the connected device.
10EN