TP-Link TD-W8901G manual Appendix FAQ

Page 9

Appendix - FAQ

Q1. How do I restore my modem’s configuration to its factory default settings?

With the Router powered on, press and hold the Reset button on the rear panel for 8 to 10 seconds before releasing it.

Press it for 8 to 10 seconds

Note

Once the Router is reset, the current configuration settings will be lost and you will need to

 

re-configure the router.

Q2. What can I do if I don’t know or forgot my password?

1)Restore the Router’s configuration to its factory default settings. If you don’t know how to do that, please refer to section Q1.

2)Use the default user name and password: admin, admin.

Q3. Why can’t I open some websites like www.msn.com or it opens very slowly?

Some website or routers requires lower MTU size, please change the default 1480 bytes to lower and try again.

1)Login to the Web-based configuration page and go to Interface Setup – Internet;

2)Locate the TCP MTU Option and change the default MTU size to 1440 or lower.

9 / 15

Image 9
Contents TP-LINK TD-W8901G Content Check Adsl Label State Description ResolutionPage Resolution Resolution Page Appendix FAQ Area Connection Click Properties Click Network Internet Connections Click Network ConnectionsDouble-click Internet Click View network Status and tasks Click View status For Windows Vista OSProtocol Version 4 TCP/IPv4 Click Internet Options Configure your IE browserSelect Never dial a connection Q5. How to get the technical support from TP-LINK?
Related manuals
Manual 66 pages 57.37 Kb