TP-Link TL-SG1008, tl-sg1048, TL-SG1024 manual Cccccccccc Lightning Protection, Cabling Reasonably

Page 18

Gigabit Unmanaged Switch

CCCCCCCCCC Lightning Protection

3333 Cabling Reasonably

In the actual network environment, you may need cable outdoors and indoors, and the requirements for cabling outdoors and indoors are different. A reasonable cabling system can decrease the damage of induced lightning to devices.

Note: It's not recommended using Ethernet cables outdoors. When cabling outdoors, please use a signal lightning arrester.

Requirements for Cabling Outdoors

Aerial cabling without safeguard is not allowed.

It’s not allowed cabling down the building to connect network devices in different floors.

Outdoor cables should be buried and paved to the indoor through basement. A piece of steel wire should be paved underground along the pipe and connected to the lightning protection terminal of the building for shielding. Before connecting the cable to the device, install a signal lightning arrester on the corresponding port.

When an aerial cable is set up, the cable should be through a metal pipe (15m long at least\ before coming into the building. The two ends of this metal pipe should be grounded. Before connecting the cable to the device, install a signal lightning arrester on the corresponding port.

It’s not necessary to pave STP cables through pipes. The shielded layer of STP cable should be well grounded. Before connecting the cable to the device, install a signal lightning arrester on the corresponding port.

13 Lightning Protection

Image 18
Contents Installation Guide Page Copyright & Trademarks FCC Statement CE Mark WarningRelated Document About this Installation Guide AudienceConventions Contents Features Cccccccccc IntroductionProduct Overview Appearance Front PanelLEDs 10/100/1000Mbps RJ45 Port Front panel of TL-SG1016D is shown as the following figureFront panel of TL-SG1008 is shown as the following figure 10/100/1000Mbps RJ45 Port and PoE Port Rear Panel Power Socket Grounding TerminalCCCCCCCCCCInstallation Package ContentsSafety Precautions Clearness Temperature/HumiditySite Requirements Electromagnetic InterferenceInstallation Tools Installation SiteLightening Protection Product Installation Desktop InstallationRack Installation Fffffffffff Rack Installation Cccccccccc Lightning Protection Cabling ReasonablyRequirements for Cabling Outdoors Requirements for Cabling Indoors Connecting to the Grounding Bar Connect to GroundConnecting to the Ground via the Power Supply Equipotential BondingUse Lightning Arrester Gigabit Unmanaged Switch CCCCCCCCCCConnection Verify InstallationPower On Ethernet PortInitialization Appendix a Troubleshooting Qqqq The Power LED is not litAppendix B Specifications CSMA/CDAppendix C Technical Support DST1 Page Page Mail support@tp-link.com 7106504444 REV4.0.0
Related manuals
Manual 28 pages 35.55 Kb Manual 6 pages 20.27 Kb Manual 32 pages 8.69 Kb

TL-SG1024D, TL-SG1016D, TL-SG1008PE, TL-SG1016, TL-SG1008 specifications

TP-Link has earned a reputation for delivering reliable and high-performance networking solutions, and its series of Gigabit switches is no exception. Among its offerings, the TL-SG1016, TL-SG1048, TL-SG1024, TL-SG1008, and TL-SG1016D stand out for their robust features, advanced technologies, and versatility in meeting the needs of various network environments.

The TL-SG1016 is a 16-port Gigabit Ethernet switch designed for small to medium-sized businesses. It boasts a user-friendly design, enabling easy plug-and-play setup without the need for configuration. With a wide range of supported operating systems, this switch is compatible with various devices, ensuring seamless integration into existing networks. It supports auto-negotiation, delivering optimal port speed and duplex mode, thus enhancing overall performance.

For those requiring additional port density, the TL-SG1048 offers 48 ports while retaining the same high performance. It’s ideal for larger networks, providing ample connectivity for devices and users. The switch features Layer 2 technology, ensuring efficient data forwarding and enhanced traffic management. Its fanless design contributes to silent operation, making it suitable for office environments where noise levels must be kept to a minimum.

The TL-SG1024, with its 24-port configuration, strikes a balance between size and performance, making it perfect for growing networks. Much like its siblings, it utilizes Gigabit Ethernet to facilitate high-speed data transfers. An essential characteristic of this switch is its energy efficiency—compliance with IEEE 802.3az standards allows it to save power during low-traffic periods, contributing to lower operational costs.

The TL-SG1008 is an 8-port switch designed for small offices or home use. Despite its compact size, it delivers Gigabit speeds across all ports, ensuring that bandwidth-intensive applications run smoothly. It also features a plug-and-play setup for straightforward installation and ease of use.

Finally, the TL-SG1016D is a cost-effective 16-port switch tailored for small office needs. It includes features like auto-MDI/MDIX, which eliminates the need for crossover cables, allowing for versatility in connections. The switch’s metal casing ensures durability, while its power-saving technology minimizes energy consumption.

These TP-Link switches effectively combine performance, energy efficiency, and user-friendly features, making them suitable for diverse networking needs in both commercial and residential environments. Their reliability and excellent performance make them a preferred choice for users looking to enhance their network infrastructure.